Start Massage; Customise Massage; Suggestions For Use; Maintenance Storing - Oregon Scientific i.comfort IBM80010 User Manual

START MASSAGE

Place the massager behind your back, under
1.
your feet or legs.
NOTE
Adjustable straps provided can be used to
Press button to start operating the
2.
massager. '15' indicates massage has begun
and there are 15 minutes remaining.

CUSTOMISE MASSAGE

1. Press to select desired massage
direction ('C1' indicates
indicates anticlockwise).
Press to select desired massage
2.
intensity ('P1' indicates normal, 'P2' indicates
medium, 'P3' indicates strong).
Press HEAT button to activate the heat
3.
function. To turnthe heat off, Press the HEAT
button again. We advice not to exceed
15-minute massage duration at a time.
NOTE
The unit will be stopped automatically when
overheat.

SUGGESTIONS FOR USE

Lower Back
Shoulder
Feet
NOTE
This product is not intended to be used as a pillow
or headrest. Do not place around head area and /
or use as head massager.
WARNING
This unit can only withstand a maximum of 30 kg
pressure. Do not sit or rest heavy objects on unit.
For safety reasons, unit will automatically turn off
if over 30 kg pressure is exerted on it.
clockwise, 'C2'
Thighs
Calves
3
MAINTENANCE
STORING
Place the unit in its box or in a safe, dry, cool place.
Refrain from sharp edges or pointed objects that
might cut or puncture the fabric surface. To avoid
breakage, do not wrap the power cord around the
unit. Do not hang the unit by the power cord or the
cord of the remote control unit.
For your travelling comfort and ease of storage, a
woven bag has been provided.

CLEANING

Unplug the unit and allow it to cool down before
cleaning. Clean only with a soft, slightly damp
sponge. Never allows water or any other liquids to
come into contact with the unit.
• Do not immerse in any liquid.
• Never use abrasive
g a s o n i l , e k e o r s e n , e
paint thinner to clean.
• Do not remove or unzip the unit cover to clean
the internal parts.
Do not attempt to repair the i.comfort™ Massage
Cushion with Heat. There are no user serviceable
parts.

SPECIFICATIONS

DESCRIPTION
TYPE
MAIN UNIT
410 (L) x 350 (W) x 135 (H) mm
L x W x H
(30.7in x 15.7in x 3.54in)
2.9 Kg
Weight
Power
36W
Consumption
Voltage
Input 100-240V ~ 50 / 60Hz
Output 24V / 1500mA
NOTE
contents of the user manual are subject to change
without notice.
cleaners, brushes,
g a l s s f / r u i n u t e r p o s i l h r o