Get Started; Install Smartchip Card And Battery - Nokia 2610 User Manual

1. Get started

■ Install SmartChip card and battery

Keep all SmartChip cards out of the reach of small children.
For availability and information on using SmartChip card services, contact your
SmartChip card vendor. This may be the service provider, network operator, or
other vendor.
Always switch the device off and disconnect the charger before removing the battery.
Note: Always switch off the power and disconnect the charger and any
other device before removing the covers. Avoid touching electronic
components while changing the covers. Always store and use the device
with the covers attached.
1. Press and slide the back cover toward the bottom of the phone to remove
the cover (1).
2. Remove the battery by lifting it as shown (2).
3. Carefully lift the SmartChip card holder from the finger grip of the phone, and
open the flip cover (3).
4. Insert the SmartChip card, so that the bevelled corner is on the upper right
side and the gold-colored contact area downward (4). Close the SmartChip
card holder, and press it to lock it into place (5).
5. Insert the battery into the battery slot (6).
6. Align the back cover with the back of the phone, and slide it upwards.
Push the back cover up to the top of the phone to lock it (7).
G e t s t a r t e d
9