Record The Announce Only Message; Set The Ring Delay; Set The Time - Oregon Scientific OS5851L-BR User Manual

086L004968-026
24/75
REV:1

RECORD THE ANNOUNCE ONLY MESSAGE

A special announcement (Outgoing message 2) can be recorded for callers when the
Announce Only function is on.
1. Press MENU and use
submenu. The voice prompt will say "Select to record outgoing message 2" and
will show.
2. Press MENU. The voice prompt will say "Start recording after the beep" and a beep
will sound to indicate recording has started.
3. Record the desired announcement. The recording time (in seconds) will show.
4. Press MENU to stop recording. The recorded message will play.

SET THE RING DELAY

The Ring Delay function allows you to set the number of rings before the machine answers
a call.
1. Press MENU and use
prompt will say "Set number of rings" and
2. Press MENU to enter the sub-menu. The voice prompt will announce the current
setting.
3. Press
6 or 8 rings.
4. Press MENU to confirm and exit to standby mode. A beep will sound to indicate the
setting is confirmed.

SET THE TIME

1. Press MENU, then press TIME. The voice prompt will read the current time and day
and
2. The setting for day will flash. (01 indicates Monday, 02 Tuesday etc.)
3. Press
4. Press MENU to confirm.
5. Repeat steps 3 and 4 to set the remaining settings:
• Hour: 00 to 23 hours.
• Hour Format: 24hr.
• Minute: 00 to 59 minutes.
or
or
or to set TS (Toll Saver: the call is answered after the short toll ring), 2, 4,
will be displayed.
or to change the setting. The voice prompt will announce the new value.
to navigate to the Record Outgoing Message 2
to navigate to the ring delay submenu. The voice
will show.
20