Initial Programming; Language Setting; Area Code Setting; Ringer Tone - Oregon Scientific OS5851L-BR User Manual

086L004968-026
12/75
REV:1

INITIAL PROGRAMMING

Before using this telephone, 4 initial settings must be completed on the handset: Lan-
guage, Area code (this is required to use Caller ID service from your telephone company),
Ringer tone, and Tone/Pulse setting.

LANGUAGE SETTING

1. Make sure the phone is OFF (not in TALK mode).
Press FLASH/PROG until "
2.
3. Press CID/VOL
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.

AREA CODE SETTING

For proper Caller ID operation, you must program your area code.
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG repeatedly until "AREA CODE - - - " shows on screen.
3. Enter your area code using the number keys. To change a digit, press CH/DEL
and then re-enter the number.
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.

RINGER TONE

1. Make sure the phone is OFF (not in TALK mode).
Press FLASH/PROG repeatedly until "RINGER TONE
2.
3. Press CID/VOL
tone.
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.

TONE/PULSE SETTING

1. Make sure the phone is off (not in TALK mode).
2. Press FLASH/PROG repeatedly until "
3. Press CID/VOL
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.
1 ENG 2 POR 3 ESP " shows on screen.
or , or the number keys (1 – 3) to select the desired language.
or , or press the number keys 1-3 to select the desired ringer
or , or press the number keys 1-2 to select TONE or PULSE.
1" shows on screen.
1TONE 2 PULSE " shows on screen.
8