Table of Contents
Advertisement
1. Press FUNC to select daily alarm, time zone or
keypad tone.
2. Press and hold SET to enter setting mode for the
daily alarm and time zone only.
3. Press + to change the setting.
4. Press SET to confirm the setting. Once the setting is
complete the display will return to the previous clock
display screen.
RA202/282_EN
ALARM SOUND
The alarm will sound for 1 minute and the backlight will
flash for the first 10 seconds.
TURN THE ALARM SOUND OFF
Press any key to turn the alarm sound OFF . The alarm
will automatically reset itself unless you deactivate it.
ACTIVATE / DEACTIVATE THE ALARM
Press MODE to navigate to Clock Mode. Press SET,
then press + to activate or deactivate the alarm.
when the alarm is activated.
USING THE ALTIMETER-BAROMETER
ABOUT THE ALTIMETER-BAROMETER
The altimeter measures altitude in either metres or feet.
The watch is equipped with an intelligent barometer that
determines altitude by the built-in sensor with the
advanced Baro-compensation technology. The sensor
can also distinguish the differences between pressure
caused by the changes in physical altitudes and pressure
caused by weather conditions. This smart distinction
eliminates discrepancies and makes the altimeter
reading more accurate than most of the average devices
available on the market.
9
9
1/27/05, 4:55 PM
shows
Advertisement
Table of Contents
