Table of Contents
Advertisement
SET THE ALTITUDE ALARM / SEA LEVEL / WEATHER ICON
From any of the 5 altitude screen displays you can set
the:
•
Altitude Alarm - Select alarm to activate above or
below your setting; set altitude alarm
•
Sea Level - Select unit hPa or inHg; set sea level
•
Weather Icon - 1 of 4 displays to choose from
1. Press FUNC to select altitude alarm, sea level or
weather icon.
2. Press and hold SET to enter setting mode.
RA202/282_EN
3. Press + to change the setting.
4. Press SET to confirm the setting.
ALTITUDE ALARM
The ascending or descending altitude alarm will be
turned on when the set altitude is reached during an
ascent or descent respectively.
Press any key to stop the alarm sound. If the set value
is reached again, the alarm will be re-activated.
NOTE Setting the altitude affects the sea level pressure.
SEA LEVEL
For an accurate reading, you must first calibrate the sea
level pressure. Once the sea level pressure is calibrated,
the altitude will automatically calibrate to the reference
altitude using the built-in auto-calibration function.
When you set the sea level on your watch it adjusts the
altimeter to the current altitude. Information on the current
sea level pressure can be found in newspapers, local
news and radio reports, or on the Internet.
NOTE It is necessary to re-calibrate the sea level
pressure or altitude if the product is placed in a
pressurised cabinet such as an aeroplane.
12
12
1/27/05, 4:55 PM
Advertisement
Table of Contents
