Advertisement
1.3.1 Naming Service
the CORBA services can be located anywhere as long as they are accessible from the CTM server on
which CTM GateWay/CORBA is installed. The OSS application(s) must also use the same instances of
the naming service and the notification service.
1.3.1 Naming Service
CTM GateWay/CORBA and the other CTM server processes must use a naming service in order to
operate. CTM GateWay/CORBA includes the OpenFusion naming service product. By default,
CTM GateWay/CORBA is configured to use OpenFusion. However, you can configure
CTM GateWay/CORBA and the CTM server to use a different centralized naming service. For more
information, see
1.3.2 Notification Service
CTM GateWay/CORBA must use a CORBA notification service to report faults and events.
CTM GateWay/CORBA includes the PrismTech OpenFusion notification service product, and is
configured by default to use it. As with the naming service, you can configure CTM GateWay/CORBA
to use a different notification service. For more information, see
page
The following scenarios describe possible configurations of the naming and notification services.
Scenario 1: Naming and Notification Services Installed on the CTM Server
The naming and notification services are installed on the CTM server workstation as shown in the
following figure.
Figure 1-2
Workstation B
The notification service must be installed on the CTM server workstation with the CTM server
processes. CTM GateWay/CORBA is configured to use this notification service. The NMS processes
must be configured to use the notification and naming services on the CTM server workstation.
Cisco Transport Manager Release 9.1 GateWay/CORBA User Guide and Programmer Manual
1-4
B.6 Using Multiple Naming Servers, page
A-1.
Naming and Notification Services on the CTM Server Workstation
Workstation A
GateWay
CTM
CORBA
Server
NMS Server
LAN Communication
Naming
Service
CTM Server
Chapter 1
Overview of CTM GateWay/CORBA
B-4.
A.1 Overview of Notifications,
Notification
Service
OL-19364-01
Advertisement
