®
TM
2.8.3 Installing Windows
8 / 8 64-bit / 7 / 7 64-bit / Vista
/
TM
Vista
64-bit with RAID
®
RAID mode is not supported under Windows
XP.
STEP 1: Set Up UEFI.
Press <F2> or <Delete> at system POST. Set RAID Mode in UEFI Setup
Utility > Advanced > Storage Configuration > SATA Mode.
STEP 2: Use "RAID Installation Guide" to set the RAID configuration.
Before you start to configure RAID, you need to check the installation
guide in the Support CD for proper configuration. Please refer to the
document in the Support CD, "Guide to SATA Hard Disks Installation and
RAID Configuration", which is located in the folder at the following path:
.. \ RAID Installation Guide
®
TM
TM
STEP 3: Install Windows
8 / 8 64-bit / 7 / 7 64-bit / Vista
/ Vista
64-
bit on your system.
28