Table of Contents
Advertisement
2.3 Installing Windows
TM
Vista
If you want to install Windows
64-bit OS on your SATA / SATA2 / SATA3 HDDs with RAID
functions, please follow the procedures below.
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY Advanced screen
Storage Configuration.
B. Set "SATA Mode Selection" to [RAID] for SATA2_2 to
SATA2_5 and SATA3_0 and SATA3_1 ports.
STEP 2: Use "RAID Installation Guide" to set RAID
Before you start to configure the RAID function, you need
to check the installation guide in the Support CD for proper
configuration. Please refer to the document in the Support
CD, "Guide to SATA Hard Disks Installation and RAID
Configuration", which is located in the folder at the following
path:
.. \ RAID Installation Guide
STEP 3: Install Windows
After the installation of Windows
to manage RAID functions, you are allowed to use both "RAID Installation Guide" and
"Intel Rapid Storage Information" for RAID configuration. Please refer to the document
in the Support CD, "Guide to SATA Hard Disks Installation and RAID Configuration",
which is located in the folder at the following path: .. \ RAID Installation Guide and
the document in the support CD, "Guide to Intel Rapid Storage", which is located in
the folder at the following path: .. \ Intel Rapid Storage Information
®
7 / 7 64-bit / Vista
64-bit With RAID Functions
configuration.
®
64-bit OS on your system.
®
7 / 7 64-bit / Vista
If you want to use "Intel Rapid Storage" in Windows
install "SATA2 driver" from the Support CD again so that "Intel Rapid
Storage" will be installed to your system as well.
®
7 / 7 64-bit / Vista
TM
7 / 7 64-bit / Vista
TM
TM
/ Vista
64-bit OS, if you want
6
TM
/
TM
TM
/ Vista
TM
/ Vista
®
environment,
Advertisement
Table of Contents
