Advertisement
BAMBINO
21-04-2004
Thank you for choosing this oil filled radiator. To get the very
best out of your new radiator it is advisable to read these
instructions before using the appliance. This is the only way
to ensure optimum results and maximum safety.
General instructions
Remove the heater from the packaging.
Check that neither the heater nor the power cable has been dam-
aged in any way during transportation.
Do not operate the heater if damaged.
Using for the first time
On using the appliance for the first time, turn it on to the maxi-
mum power setting for at least 8 hours.This is to eliminate the
'new odour', which is released by the appliance. During this time
ensure that the room is well ventilated.
Electrical connection
- Before plugging the radiator into the mains, check that your
supply voltage is the same as that shown on the rating plate of
the appliance.
- If using more than one appliance at a time, it is important to
ensure that the ring main is adequate to cope with the power
requirements.
- It is important to ensure that the socket is adequately earthed.
- This appliance complies with EEC Directive 89/336 relating to
electromagnetic compatibility.
How to use it
Switching on
Switching on
Plug into the mains socket.Turn the thermostat to maximum.
Switch the radiator on using the switch/switches following the pro-
cedures given in points a) - b).
a) Models with single switch (1 power level):
-
button in position «I» = Total power on (indicator light on);
-
button in position «O» = (indicator light off)
b) Models with double switch (3 power levels)
-
button in position «l» = minimum power (indicator light on);
-
button in position «ll» = intermediate power (indicator light
on);
-
both buttons in position «l» «ll» = maximum power
(indicator lights on)
To turn appliance off, switch off both switches or remove plug
from wall socket.
9:58
Pagina 3
3
Oil Filled Radiator
Advertisement
