Drying Only; Automatic Washing And Drying - Electrolux EW1248W Instruction Booklet

Drying only

Warning! Do not exceed the maximum laundry
loads:
- 3 kg for linen and cottons
- 2.0 kg for synthetics.
The water tap must be open and the drain hose must
be positioned in the sink or connected to the drain
pipe.
1. Load the laundry
2. Depress the ON/OFF button
machine on.
3. Select the drying programme
synthetics).
4. Depress the DRYING TIME
time you want appears in the display (for timed
drying). The corresponding light comes on.
If you wish to carry out the electronic drying,
depress button until the pilot light
corresponding to the degree of dryness required
illuminates.
5. Press the START/PAUSE button
programme.
6. At the end of the cycle, turn the programme
selector dial to RESET O and press the ON/OFF
button again to switch the appliance off.
7. Remove the laundry.

Automatic washing and drying

(NON-STOP programme)
Warning! For NON-STOP programmes, it is also
essential not to exceed the maximum load sizes of
3 kg for cotton and 2 kg for synthetics.
1. Load the laundry.
2. Add detergent and additive.
3. Switch the machine on by depressing the
to switch the
4. Select the wash programme.
5. Select eventually the required options by means
(for cotton or
button until the
to start the
6. Select the drying time or degree of drying.
7. Start the programme by depressing the
8. At the end of the programme, turn the selector
9. Remove the laundry.
21
ON/OFF button .
of the relevant buttons. If possible, do not select a
spin speed lower than that proposed by the
appliance to avoid a too long drying time so
saving energy.
In any case the reduction of the spin speed is
only possible after selecting drying. The lowest
values you can select are the following:
- 900 r.p.m. for cottons & synthetics with
electronic drying
- 900 r.p.m. for cottons and 700 r.p.m. for
synthetics with timed drying
START/PAUSE button.
dial to RESET O and press the ON/OFF button
again to switch the machine off.