Electrolux EWF1230 Instruction Booklet page 9

5. START/PAUSE button
After having selected the required programme,
press this button to start the machine; the
corresponding pilot light stops flashing and
remains lit.
To interrupt a programme which is running,
depress the Start/Pause button: the
corresponding pilot light starts to flash.
To restart the programme from the point at
which it was interrupted, press the
START/PAUSE button again.
6. Programme progress display
When you select the programme, the lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on.
: when this light comes on this means that
/
the machine is performing the washing phase. If
you have selected the "Prewash"
this light will be on during the prewash phase too.
= rinses
= spin
= drain
= end of programme
At the end of the programme the
illuminates.
The pilot light also flashes in the event of
operating problems:
- 4 flashes = the door has not been closed
- 2 flashes = the machine does not empty
- 1 flash = the machine does not fill
To eliminate the problem, see paragraph
"Something not working".
7. Programme selector dial
The selector is divided into 5 sections:
• Cotton
• Synthetics
• Delicates
• Wool
• Special programmes
The selector dial can be turned either clockwise
or anticlockwise.
Position
Position 60E corresponds to the ENERGY SAVING
programme.
function,
Position O corresponds to Reset programme/
Switching OFF of the machine.
At the end of the programme the selector dial
must be turned to position O, to switch the
machine off.
ATTENTION!
If you turn the programme selector dial to another
pilot light
programme when the machine is working, the lights
of the programme progress display start to flash.
The machine will not perform the new selected
programme.
9
corresponds to "cold wash".