Electrolux ESF 6248 User Information page 12

Setting the amount of rinse aid re-
quired
3
Only change the amount dispensed, if smears,
milky spots (reduce the amount) or dried on
water spots (increase the amount) can be seen
on glasses and dishes. (See section "If dish-
washing results are not satisfactory".) The
dosage can be set from 1-6. The dosage is
pre-set to "4" in the factory.
1. Open the dishwasher door.
2. Press the release button on the rinse aid compart-
ment.
3. Open the cover.
4. Set the dosage level.
5. Press the lid shut until it clicks into place.
6. If rinse aid has leaked out, wipe it away with a
cloth.
12