Table of Contents
Advertisement
8 electrolux
Turnspit with support
For roasting larger joints of meat and poultry.
Before Using for the first time
3
If you would like to change one of these
base settings at a later date, please refer
to the Basic Settings section.
Setting the language
1.
When the appliance has been connect-
ed to the electrical supply, the following
is shown in the display.
–
the company logo
–
the version of the software and the peri-
od of operation
–
the message "Set language"
2.
Using
or , select the desired lan-
guage.
3.
Confirm selected language with
From now on the texts in the display ap-
pear in the language set.
Setting contrast and brightness
After you have set the language, the
3
messages "Set contrast" and "Set
brightness" are displayed.
The contrast and the brightness are set
according to the language set (see sec-
tion "Setting language")
Setting the clock
After you have set the contrast and the
brightness, the message "Set Time of Day"
is displayed.
4.
Using
time.
5.
Confirm with
6.
Using
rent time.
7.
Confirm with
The appliance is now ready to use.
The time only has to be set if the appli-
3
ance is disconnected from the power
supply for a long time.
.
Initial Cleaning
Before you use the appliance for the first
time, you should clean it thoroughly.
Important: Do not use any sharp or
1
abrasive cleaning materials! These
could damage the surface.
For metal fronts, use normal commer-
3
cially available cleaning agents.
1.
Open oven door.
2.
Remove all accessories and slide-in
racks and clean with a warm solution of
water and washing-up liquid.
3.
Wipe the front of the appliance with a
damp cloth.
or
set the hour of the current
.
or
set the minutes of the cur-
.
Advertisement
Table of Contents
