Initial Cleaning; Using The Rings - Electrolux E4107-5 User Manual

8

Using the Rings

2. Using the
After approx. 5 seconds, the flashing stops and
the clock displays the time set.
The appliance is now ready to use.
The time can only be changed if no automatic
function (Duration

Initial Cleaning

Before you use the appliance for the first time, you should clean it thoroughly.
Important: do not use sharp or abrasive cleaning materials. These could damage the
surface.
For metal fronts, use normal commercially available cleaning agents.
1. Set the oven functions dial to Light
2. Remove all accessories and side rails and clean with a warm solution of water and wash-
ing-up liquid.
3. Also wipe the oven out with a warm solution of water and washing-up liquid and then
dry it.
4. Wipe the front of the appliance with a damp cloth.
Using the Rings
Also refer to the operating instructions for your built-in hob. It contains important in-
formation on ovenware, operation, cleaning and care.
The following description does not apply to induction cooking zones.
Heat settings
• You can set the heat settings from 1 -9.
• You can set intermediate settings between 2 and 7.
• In addition each of the ring switches is fitted with an automatic warm up function.
or button, set the current time.
or End ) has been set.
.