Table of Contents
Advertisement
On the Text Size menu, select Playback Text Size and press OK. Then select
Small, Medium, Large, or One Word At a Time. Press OK.
In One Word At a Time mode, the display screen shows a single word of text at
a time, and plays it back to you at the speed you select using the Voice Speed
menu. For more information about setting the voice speed, see the Adjusting
Voice Speed section, later in this chapter.
Press the Back button to return to the Text Size menu.
Setting the Display Timeout
The Reader dims the light on the display screen after a period of inactivity. When
the display screen is dim, the Reader is not turned off. The LED indicator next to
the Power button remains lit. However, you cannot see anything on the screen.
Dimming the display prevents images from being burned into the screen, and
helps preserve the battery charge.
The default timeout period is 1 minute. You can also select 30 Seconds, 5
Minutes, or Never. No matter which timeout period you select, the display will
stay lit as long as you are listening to the Reader or navigating its menus.
TIP: Letting the display time out helps your battery charge last longer. The
best practice is to set a short timeout period before the display dims.
To change the length of the timeout period, go to the Display menu and select
Display Timeout. Press OK. The Display Timeout menu appears. Select a
timeout period, then press OK. Press the Back button to return to the Display
Reader User Manual
59
7
Advertisement
Table of Contents
