Starting A Washing Programme - Electrolux ESF 6152 Instruction Book

Starting a washing programme

1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off push button
The On/Off indicator light illuminates.
5. Setting and starting the programme
To select a programme, press the push button of the
programme you wish to select, the indicator light of the
push button illuminates and in the digital display will
appear, flashing, the running time of the programme that
has been set. The phase indicator lights foreseen for that
programme will illuminate.
After about 3 seconds from the last pressure of a push
button the programme starts automatically.
In the digital display the running time of the programme is
no longer flashing and the indicator lights of the phases
will turn off except for the phase underway.
Setting and starting the programme with
"Baby care option"
To select a programme, press the push button of the
programme you wish to select, the indicator light of the
push button illuminates and in the digital display will
appear, flashing, the running time of the programme that
has been set. The phase indicator lights foreseen for that
programme will illuminate.
Within 3 seconds press the push button for the option
"Baby care". The indicator light of "Baby care" push
button illuminates
Pressing the "Baby care" push button switches the
function on or off. The indicator light of "Baby care" push
button shows the current setting.
"Baby care"
indicator light on
"Baby care"
indicator light off
After about 3 seconds from the last pressure of a push
button the programme starts automatically.
In the digital display the running time of the programme is
no longer flashing and the indicator lights of the phases
will turn off except for the phase underway.
Option activated
Option deactivated
(factory setting)
6. To interrupt cancel a washing
programme in progress
Interrupt or cancel a washing programme in progress
ONLY if it's absolutely necessary.
Attention! Hot steam may escape when the door is
opened. Open the door carefully.
To interrupt a washing programme in
progress
a) Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the point
in which it was interrupted.
b) Press the On/Off push button, in this case all the
indicator lights turn off (except for the On/Off indicator
light). Press the On/Off push button again; the
programme will start from the point in which it was
interrupted.
To cancel a washing programme in
progress
To cancel a washing programme you have to reset the
dishwasher; press simultaneously the function push
buttons 2 and 3 for about 2 seconds, the indicator light
of the running programme starts flashing for about 2
seconds. After about 2 seconds all the indicator lights
will turn off (except for the On/Off indicator light)
indicating that the running programme has been
cancelled.
If a new washing programme will be selected, check
that there is detergent in the detergent dispenser.
7. Setting the "delay start"
The setting of the delay start occurs before selecting
the programme
Press the On/Off push button.
Press the delay start push button until the flashing
number of the hours for the delay start appear in the
digital display.
Select a washing programme. In the digital display will
appear, for a moment, the running time of the programme
and then again appears the selected delay start time.
As soon as the number of hours is displayed without
flashing, the countdown for the delay start is active.
The countdown will decrease with steps of 1 hour.
The opening of the door during the countdown will not
modify the delay start.
Once the delay start has elapsed the programme will
start automatically.
To change the "delay start"
As long as the washing programme has not yet started,
you can change the number of hours for the delay start by
pressing the delay start push button.
To cancel the "delay start"
As long as the washing programme has not yet started,
you can cancel the delay start setting by pressing the
delay start push button until in the digital display appears
the time duration of the selected programme.
The washing programme will start immediately.
16