Description Of The Appliance; Extractor Version; Filter Version - Electrolux EFT611 User Manual

Description of the appliance

• The hood is supplied as an extractor unit and
can also be used with a filtering function by
fitting one charcoal filter (special accessory).
• You will need original ELECTROLUX charcoal
filter for this function (see Special Accessories).

Extractor version

• The unit features two outlet holes, one of which
A is located on the top of the unit while the
other B is located on the rear.
• To connect up the hose, you should first fit the
bayonet-mounting flange C (Ø 120 mm) on the
outlet required (if using the top outlet, fix the
flange in place using the screw supplied as
shown in Fig. 1).
Close off the unused hole using the bayonet
fitting caps D.
• Warning! If is decided to use the rear outlet
hole B, first remove the sponge E that closes
that hole. Fig. 2.

Filter Version

• The air is filtered and recirculated through the
front grid.
• Move the lever G to position F - Fig. 3.
• You will need an original AEG KF12/13
activated carbon filter for the filtering function.
(See Special Accessories).
28
Fig. 1
Fig. 2
Fig. 3