Table of Contents
Advertisement
GB
Switch and indicators
A)On/off indicator
B)Thermostat and on/off switch
C)Quick freeze indicator
D)Acoustic signal stop and quick freeze switch
E) Alarm indicator
Operation and use
Installation
Insert the plug into the socket. In order to switch on the
product, turn the thermostat (B) to a temperature lower
than << -16°C >>. The green, yellow and red indicators
will light up. The lighting up of the on/off indicator (A)
means that the product is switched on. The yellow indi-
cator lights continuously indicating an uninterrupted
refrigeration for 5 hours (it can be switched off manual-
ly after 2 hours). The red indicator lights continuously
indicating an improper temperature in the freezing com-
partment. As well as an intermittent sound can be
heard, which can be stopped by pressing button (D)
once. You can switch off the freezer by turning the ther-
mostat (B) in position <<
When the product is switched on for the first
time, the quick freeze function will start auto-
matically and will stop only 5 hours later. You can
manually switch off this function any time by press-
ing the quick freeze (D) switch.
Adjusting the temperature
The internal temperature of the freezer is regulated
electronically through five temperature positions and a
switch-off <<
>> setting.
Position << -16°C >> indicates the highest (least cold)
temperature, while position << -24°C >> is for the low-
est (coldest) temperature. Rotate the thermostat in the
desired position.
In general, it is best to set the thermostat to << -18°C
>> but, for the purpose of temperature setting, you
should also consider
the temperature of the room where the product is
installed,
the frequency of door openings,
the volume of food to be stored in the product,
the location of the product.
Therefore, you should consider all these factors and
you may have to do some testing for finding the best
temperature. If you want a lower temperature, turn the
thermostat into a position of higher number or, vice
versa, if you need a higher temperature, you should set
a position of lower number. Please allow 24 hours for
the freezer temperature to stabilize between two adjust-
ments.
Alarm (red) indicator
The temperature alarm indicator (E) will light up when
the internal temperature of the freezer increases to a
level (above -12°C) where the long-term conservation
44
green
yellow
red
>>.
Advertisement
Table of Contents
