Table of Contents
Advertisement
To set the timer more quickly, leave your finger on the + or - sensor
3
field until the required time is reached.
If the - sensor field is operated first, the time setting will begin at
99 minutes; if the + sensor field is operated first, the time setting will
begin at 1 minute.
Displaying the remaining cooking time
If you select a cooking zone which is in timer mode, the cooking time
still remaining appears in the timer display window.
Using the timer to measure short periods of time ("egg
timer")
The timer function can also be used to measure short times without
3
the automatic switch-off function, provided the timer is not already
being used for 1 or more cooking zones. No cooking zone may be se-
lected in this case. The cooking zone sensor field with the decimal
point in the display must therefore be touched again so that the deci-
mal point goes out.
Set the time as described above.
Ending the timer function prematurely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer simultaneously
1. Select the desired cooking zone using the cooking zone buttons.
2. Touch the + and - buttons simultaneously: The cooking zone and
timer will switch off.
Switching off the timer - leaving the cooking zone active
1. Select the desired cooking zone using the cooking zone buttons.
2. Touch the "Timer" button again
3. Touch the + and - buttons simultaneously:
– Only the timer will switch off.
– The cooking zone will stay on.
23
Advertisement
Table of Contents
