7. Loosely screw in fixing plates / re-
taining grips from below on the
worktop and on the connecting
cross bar.
8. Place Frontline strips on the appli-
ances. Check that the Frontline
strips are in line with one another.
9. Tighten the fixing plate / retaining
grip screws.
10.Inject a line of silicon into the gap be-
tween the appliances.
11.Dampen silicon line with a little soapy
water.
12.Press rubber block hard against the
glass ceramic and draw it slowly
along the gap.
installing more than one frontline hob electrolux 25