Maintenance - Valley Comfort Systems MP80 Installation And Operation Manual

Solid fuel furnace for use as an add-on to oil, gas or electric furnace or as an independent forced air with blower

Hide thumbs Also See for MP80:

Table of Contents

MAINTENANCE

Maintain fire door gaskets to ensure a tight seal. Use 7/8" replacement gasket. Glue is not necessary as

high density gasket will fit tight and stay secure.

WARNING: DO NOT OPERATE THIS WOOD FURNACE IF THE DOOR GASKET IS MISSING

OR DAMAGED. DANGEROUS OVERFIRING CAN OCCUR WHICH CAN DAMAGE THE AP-

PLIANCE OR IGNITE CREOSOTE IN THE CHIMNEY, POSSIBLY CAUSING A HOUSE FIRE.

IF ANY PART OF THE WOODSTOVE OR FLUE SYSTEM IS GLOWING THE FURNACE IS BE-

ING OVERFIRED.

OPERATE THE ALTERNATE ELECTRIC, GAS OR OIL FURNACE PERIODICALLY TO EN-

SURE THAT IT WILL OPERATE SATISFACTORILY WHEN NEEDED.

INSPECT VENT PIPES, VENT PIPE JOINTS AND VENT PIPE SEALS REGULARLY TO ENSURE

THAT SMOKE AND FLUE GASES ARE NOT DRAWN INTO OR CIRCULATED BY, THE AIR

CIRCULATION SYSTEM

Your appliance has been manufactured in the Valley Comfort tradition of high quality. To ensure years

of trouble free operation, have your furnace serviced regularly by your Valley Comfort dealer.

After each heating season thoroughly clean the chimney and firebox so your system is ready for next

fall. Inspect all parts for signs of abnormal wear or problems.

MP80.PUB Version 1.07

Table of Contents

Show Quick Links

Table of Contents