Advertisement
This function can adjust the size of
grades, you can choose the
16:9 screen).
Operation
1. Press "MENU" button on the control board, it will show "menu function
window" on the screen.
2. Press [
] button to enter "FUNCTION" menu function.
3. Press [
] button or [
4. Press [
] button or [
5. Press [MENU] button twice to tu
This function can be only
VGA mode is not active.
Take off lens cap or not.
Projector is in bulb protect mode for 5 minutes after powering off. The
projector will not turn back on until the blub is cool.
Brightness level too low.
The input picture is all black or not. Some times the input picture is all
black because of screen protect.
Bulb not set properly in receptacle. Reset bulb
the image "Zoom" menu is divided 9
right grade to gain the best size (The grade 9 is
] button, move cursor to "ZOOM",
] button, choose ZOOM ratio.
rn back to "menu function window".
used in VIDEO, S-VIDEO m
ode. The operation in the
13
Advertisement
