Advertisement
3. Press [
] button or [
4. Press [
] button or [ ] button, choose appointed function.
5. Press [MENU] button twice to tu
Operation
1. Press "MENU" button on the control board, it will show "menu function
window" on the screen.
2. Press [
] button to enter "FUNCTION" menu function.
3. Press [
] button or [
4. Press [
] button or [ ] button, choose appointed function.
5. Press [MENU] button twice to tu
Make sure that VGA signal connection is ok, than follow "section 1 input
menu" to enter VGA mode, you can operate as below.
1.
Picture and setting option
The adjusting method of Brightness, contrast, color, language and
vision mode is the same as adjusting under VIDEO signal. Please refer to
section 1 to section 10 of this chapter.
2.
Picture's location
Operation
1. Press "MENU" button on the control board, it will show "menu function
window" on the screen.
2. Press [ ] button or [ ] button, move cursor to
3. Press [
] button to enter "PC" menu function.
4. Press [ ] button or [ ] button, move cursor to "picture's location".
5. Press [ ] button, enter the adjusting of "picture's location".
6. Press
[ ]
up/down/left/right.
7. Press [MENU] button twice to turn back to "menu function window".
] button, move cursor to "PICTURE SWAP"
] button, move cursor to "PICTURE SWAP"
rn back to "menu function window".
] button, move cursor to "MEMORY RECALL"
rn back to "menu function window".
[ ]
[ ]
[ ]
button
"PC".
to
adjust
picture's
position
Advertisement
