Advertisement
1. Turn off the power of the video source equipment, which is connected
to the projector.
2. Press the POWER button on the projector or STANDBY/ON button
on the remote control.
3. The projector lamp will turn off ,the exhaust fan will continue to run for
up to 3 minutes in order to cool the projector lamp and extend lamp life.
when the exhaust fan turns off it is safe to remove the power cable.
4. Place lens cap over lens.
The picture size is a variable based on the distance between projector and
screen. You can get the best image by adjusting the distance between
projector and screen.
Please refer to form (1)
You can adjust the projector degree to proper degree by adjusting the
keystone. To reduce distortion, align the projector to the center of the screen
as close as you can. Degree offsets of 30 degrees off the center point of the
screen can cause visual distortion.
Grasp the metal portion of the lens and rotate in either direction until the
image is clear and sharp.
Advertisement
