Drive Chain Slack - Yamaha Raptor 700R YFM70RSPX Owner's Manual

and to decrease it, turn the nut in direction (b).
1
2
2
3
4
5
6
1. Clutch lever free play adjusting nut (crankcase)
7
2. Locknut
8
8. Tighten the locknut at the crankcase and the
clutch lever.
9
NOTE:
10
If the specified free play cannot be obtained as de-
scribed above or if the clutch does not operate cor-
11
rectly, have a Yamaha dealer check the internal
clutch mechanism.
(b)
(a)
1
EBU26861

Drive chain slack

The drive chain slack should be checked before
each ride and adjusted if necessary.
To check the drive chain slack
1. Place the ATV on a level surface.
NOTE:
When checking and adjusting the drive chain
slack, there should be no weight on the ATV and
all tires must be touching the ground.
2. Move the ATV back and forth to locate the
tightest portion of the drive chain, and then
measure the drive chain slack as shown.
Drive chain slack:
25.0–35.0 mm (0.98–1.38 in)
8-33