Yamaha GRIZZLY 700 2012 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Offroad Vehicle
  5. GRIZZLY 700 2012
  6. Owner's manual
Yamaha GRIZZLY 700 2012 Owner's Manual

Yamaha GRIZZLY 700 2012 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

YFM7FGD/YFM7FGPD/YFM7FGPHD
YFM7FGPAD/YFM7FGPSED/YFM7FGPLED
READ THIS MANUAL CAREFULLY!
It contains important safety information.
LIRE ATTENTIVEMENT CE MANUEL!
Il comprend d'importantes informations de sécurité.
¡LEA ESTE MANUAL ATENTAMENTE!
Contiene indicaciones importantes acerca de la seguridad.
MANUEL DU PROPRIÉTAIRE
MANUAL DEL PROPIETARIO
YFM700FAPD/YFM700FAPSED
OWNER'S MANUAL
1HP-F8199-61

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GRIZZLY 700 2012 and is the answer not in the manual?

Questions and answers

Related Manuals for Yamaha GRIZZLY 700 2012

Summary of Contents for Yamaha GRIZZLY 700 2012

  • Page 1 READ THIS MANUAL CAREFULLY! It contains important safety information. LIRE ATTENTIVEMENT CE MANUEL! Il comprend d’importantes informations de sécurité. ¡LEA ESTE MANUAL ATENTAMENTE! Contiene indicaciones importantes acerca de la seguridad. OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE MANUAL DEL PROPIETARIO YFM7FGD/YFM7FGPD/YFM7FGPHD YFM7FGPAD/YFM7FGPSED/YFM7FGPLED YFM700FAPD/YFM700FAPSED 1HP-F8199-61...
  • Page 2 PRINTED IN USA 2012.04-0.6×1 CR (E,F,S)
  • Page 3 READ THIS MANUAL CAREFULLY! It contains important safety information. OWNER’S MANUAL YFM7FGD/YFM7FGPD/YFM7FGPHD YFM7FGPAD/YFM7FGPSED/YFM7FGPLED YFM700FAPD/YFM700FAPSED WARNING This ATV should not be ridden by anyone under 16 years of age. 1HP-F8199-61-E0...
  • Page 4 Read this manual carefully before operating this vehicle. This manual should stay with this ve- hicle if it is sold. EC Declaration of Conformity conforming to Directive 2006/42/EC We, YAMAHA MOTOR CO., LTD. 2500 Shingai, Iwata, Japan, declare in sole responsibility, that the product YFM700FWAD (YFM7FGP) (5Y4AM09W0C0501101–)
  • Page 5 Yamaha experience in the production of fine sporting, touring, and pacesetting racing machines. With the purchase of this Yamaha, you can now appreciate the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields.
  • Page 6 EBU17330 IMPORTANT MANUAL INFORMATION EBU17342 FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERIOUS IN- JURY OR DEATH. Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential per- sonal injury hazards.
  • Page 7 Please check your local riding laws and regulations before operating this ATV. EBU17410 YFM7FGD/YFM7FGPD/YFM7FGPHD YFM7FGPAD/YFM7FGPSED/YFM7FGPLED YFM700FAPD/YFM700FAPSED OWNER’S MANUAL ©2012 by Yamaha Motor Co., Ltd. 1st edition, March 2012 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Co., Ltd.

  • Page 8: Table Of Contents

    EBU17420 TABLE OF CONTENTS LOCATION OF THE WARNING AND Storage compartments ......4-18 SPECIFICATION LABELS ......1-1 Front carrier ..........4-21 Rear carrier ..........4-21 SAFETY INFORMATION ......2-1 Adjusting the front and rear shock absorber assemblies .......4-21 DESCRIPTION ..........3-1 Auxiliary DC jack ........4-23 Left view ............
  • Page 9 Parking ............6-5 Removing and installing panels ....8-10 Parking on a slope ........6-5 Removing the radiator grills ......8-20 Accessories and loading ......6-6 Checking the spark plug ......8-20 Engine oil and oil filter cartridge ....8-22 RIDING YOUR ATV ........7-1 Final gear oil ..........8-27 GETTING TO KNOW YOUR ATV....
  • Page 10 Checking the wheel hub bearings .... 8-55 Checking the stabilizer bushes ....8-55 Lubricating the rear knuckle pivots ... 8-55 Lubricating the steering shaft ....8-56 Battery ............8-56 Replacing a fuse ........8-59 Replacing a headlight bulb ....... 8-61 Adjusting a headlight beam ......

  • Page 11: Location Of The Warning And Specification Labels

    Read and understand all of the labels on your ATV. These labels contain important information for safe and proper operation. Never remove any labels from your ATV. If a label becomes difficult to read or comes off, request a replace- ment label from your Yamaha dealer. For Europe...
  • Page 12 45 kg 1322 lbf < 147 N < 15 kgf ( 99 lbs) < 33 lbf 37S-F817S-00 1HP-F817R-00 1HP-F2259-21 YAMAHA 1P0-F816P-20 < 85 kg ( 187 lbs) 1HP-F817R-10 35.0 kPa 30.0 kPa 0.35 kgf/cm² 0.30 kgf/cm² 5.0 psi 4.4 psi...
  • Page 13 7 YFM7FGD YFM700FWA 2012 34.0 kW YAMAHA MOTOR CO., LTD. 294 kg 2500 SHINGAI, IWATA, JAPAN 1ND-F155A-00 7 YFM7FGPD/YFM7FGPHD/YFM7FGPAD/ YFM7FGPSED/YFM7FGPLED YFM700FWAD 2012 34.0 kW YAMAHA MOTOR CO., LTD. 294 kg YAMAHA 1HP-F811R-00 2500 SHINGAI, IWATA, JAPAN 1HP-F155A-10 < 0.5 kg...
  • Page 14 37S-F816S-00 YAMAHA 1P0-F816R-00...
  • Page 15 Familiarize yourself with the following pictograms and read the explanatory text, then make sure to check the pictograms that apply to your model. Read the Owner’s manual. NEVER use on paved roads. ALWAYS use an approved helmet and NEVER carry passengers. protective gear.
  • Page 16 This unit contains high-pressure nitrogen Turning 4WD-LOCK gas. (“DIFF.LOCK”) takes more effort. Mishandling can cause an explosion. Do not Operate at a slow speed and allow extra incinerate, puncture or open. time and distance for maneuvers to avoid loss of control. This pictogram shows the loading limits and/or maximum load capacity for this ATV.
  • Page 17 Year of construction Model Name **** ****** *** kW YAMAHA MOTOR CO., LTD. Max. Power *** kg 2500 SHINGAI, IWATA, JAPAN Mass In Running Order...
  • Page 18 For Oceania...
  • Page 19 LOAD LIMIT PULLING LOAD: 5880 N (600 kgf) 1322 lbf 45 kg (99 lbs) TONGUE WEIGHT: 147 N ( 15 kgf) 33 lbf YAMAHA 1HP-F4877-A0 37S-F151K-00 WARNING NEVER ride as a passenger. Passengers can cause a loss of control, resulting in SEVERE 1HP-F2259-21 INJURY or DEATH.
  • Page 20 Maximum Vehicle Load : 220 kg, (485 lbs) Includes weight of operator, cargo and accessories UNDER (and if applicable, trailer tongue weight). YAMAHA 1HP-F816M-00 Operating this ATV if you are under the age of 16 increases your chance of severe injury or death.
  • Page 21 • use proper riding techniques to avoid vehicle overturns on hills and rough terrain and in turns. • avoid paved surfaces-pavement may seriously affect handling and control. LOCATE AND READ OWNER’S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS. YAMAHA 4XE-F1568-10 1-11...

  • Page 22: Safety Information

    EBU17431 SAFETY INFORMATION ● EBU27253 Never allow a child under age 16 to operate an ATV without adult supervision, and never allow AN ATV IS NOT A TOY AND CAN BE HAZARD- continued use of an ATV by a child if he or she OUS TO OPERATE.
  • Page 23 ● Never operate at speeds too fast for your skills ● Never operate the ATV on hills too steep for the or the riding conditions. Always go at a speed ATV or for your abilities. Practice on smaller hills that is proper for the terrain, visibility, operating before attempting larger hills.
  • Page 24 ● Always use proper procedures if you stall or roll reduced stopping ability. Test your brakes after backwards when climbing a hill. To avoid stall- leaving water. If necessary, apply them several ing, use the proper gear range and maintain a times to let friction dry out the linings.
  • Page 25 In the event of an accident tion. If necessary, contact your riding party or 1. If serious injuries are incurred, you may be local authorities to let them know where you safer staying next to your vehicle; it may are and what has happened. shield you from oncoming riders.
  • Page 26 This im- While you may find aftermarket products similar in proper position limits the freedom of movement design and quality to genuine Yamaha accesso- of the operator and may limit control ability, ries, recognize that some aftermarket accessories...
  • Page 27 ● Do not run engine outdoors where engine EWB00072 WARNING exhaust can be drawn into a building through openings such as windows and Avoid Carbon Monoxide Poisoning All engine exhaust contains carbon monoxide, doors. a deadly gas. Breathing carbon monoxide can cause headaches, dizziness, drowsiness, nau- sea, confusion, and eventually death.

  • Page 28: Description

    EBU17680 DESCRIPTION EBU17690 EBU17700 Left view Right view 1. Rear shock absorber assembly spring preload adjusting 1. Radiator cap ring 2. Battery 2. Rear storage compartment and tool kit 3. Fuses 3. Fuel tank cap cover 4. Air filter case 4.

  • Page 29: Controls And Instruments

    EBU17712 Controls and instruments The ATV you have purchased may differ slightly from the figures shown in this manual. 1. Drive select lever 2. Rear brake lever 3. Handlebar switches 4. Horn switch 5. Rear brake fluid reservoir 6. Multi-function display 7.

  • Page 30: Instrument And Control Functions

    EBU17734 INSTRUMENT AND CONTROL FUNCTIONS EBU29911 Main switch The positions of the main switch are as follows: “ ” (on) All electrical systems are supplied with power. The headlights and taillight come on when the light switch is on, and the engine can be started. The key cannot be removed.

  • Page 31: Indicator Lights And Warning Lights

    EBU26695 EBU17990 Low-range indicator light “ ” Indicator lights and warning lights This indicator light comes on when the transmis- sion is in the low-range position. EBU17980 High-range indicator light “ ” This indicator light comes on when the transmis- sion is in the high-range position.
  • Page 32 “ ” (on), or if the warning light 4-7 for an explanation of the self-diagnosis device.) remains on, have a Yamaha dealer check the elec- The electrical circuit of the warning light can be trical circuit.
  • Page 33 “ ” (on). If the switch is set to the “LOCK” position. warning light does not come on, have a Yamaha dealer check the electrical circuit. ● Due to the synchronizing mechanism in the dif- ferential gear case, the four-wheel-drive indica- ●...

  • Page 34: Multi-Function Display

    ● an hour meter (which shows the total time the EBU30493 Multi-function display engine has been running) ● a fuel meter ● a self-diagnosis device Odometer and tripmeter modes Pushing the “SELECT” button switches the display between the odometer mode “ODO” and the trip- meter modes “TRIP A”...
  • Page 35 CLOCK → HOUR → CLOCK ing indicator will start flashing. If this occurs, have a Yamaha dealer check the electrical circuit. To set the clock 1. Set the display to the clock mode.

  • Page 36: Handlebar Switches

    5. Horn switch “ ” If the multi-function display indicates an error code, EBU18080 note the code number, and then have a Yamaha Engine stop switch “ ” dealer check the vehicle. Set this switch to “...
  • Page 37 EBU18101 EBU18190 Start switch “ ” Override switch “OVERRIDE” Push this switch to crank the engine with the start- er. See the starting instructions on page 6-1 prior to starting the engine. EBU18154 Light switch “ /OFF” Set this switch to “ ”...
  • Page 38 In moving may cause the ATV to unexpectedly this case, take the ATV to a Yamaha dealer at the handle differently. This could distract the oper- first opportunity.
  • Page 39 ● “4WD” (four-wheel drive): Power is supplied to EBU30461 On-Command differential gear lock switch the rear and front wheels. “4WD”/“LOCK” To change from two-wheel drive to four-wheel EWB00131 drive, stop the ATV and push the switch in to the WARNING “4WD”...
  • Page 40 control and have an accident if you cannot make a sharp enough turn for the speed you are traveling. This ATV is equipped with a switch allowing you to lock the differential gear when in four-wheel drive. Select the appropriate switch position according to the terrain and the conditions.
  • Page 41 LOCK 1. Differential gear lock lever 1. On-Command differential gear lock switch “4WD”/“LOCK” 2. On-Command four-wheel-drive switch “2WD”/“4WD” To unlock the differential gear, stop the ATV and Stop the ATV, move the differential gear lock lever push the switch to the “4WD” position. to position (a), and then push the differential gear lock switch in to the “LOCK”...

  • Page 42: Throttle Lever

    ● Riding before the differential gear is properly en- gaged or disengaged (e.g., when the indicator and indicator light are flashing) will cause the ve- hicle speed to be limited until the differential gear is completely engaged or disengaged. ● When the ATV is in four-wheel-drive differential gear lock, the maximum traveling speed is limit- ed to 35 km/h (22 mi/h).

  • Page 43: Front Brake Lever

    crease the maximum engine power available EBU18391 Front brake lever and the maximum speed of the ATV, turn the The front brake lever is located on the right handle- adjusting screw in direction (b). Do not turn bar. To apply the front brake, pull the brake lever the adjusting screw out more than 12 mm toward the handlebar grip.

  • Page 44: Drive Select Lever

    EBU18611 Drive select lever The drive select lever is used to shift your ATV into the low-range, high-range, neutral, reverse and park positions. See the “Operating the drive select lever and driving in reverse” section on page 6-2 for the drive select lever operation. 1.

  • Page 45: Fuel

    To install the fuel tank cap Install the fuel tank cap by turning it clockwise until a click is heard, and then close the fuel tank cap cover. EBU18755 Fuel Make sure there is sufficient gasoline in the tank. EWB02521 WARNING Gasoline and gasoline vapors are extremely flammable.
  • Page 46 expands when it heats up, heat from the en- 3. Wipe up any spilled fuel immediately. gine or the sun can cause fuel to spill out of NOTICE: Immediately wipe off spilled fuel the fuel tank. with a clean, dry, soft cloth, since fuel may deteriorate painted surfaces or plastic parts.

  • Page 47: Seat

    Your Yamaha engine has been designed to use To install the seat regular unleaded gasoline with a research octane Insert the projections on the front of the seat into number of 91 or higher (95 or higher for Europe). If...
  • Page 48 ECB00830 NOTICE Do not store metal or sharply edged objects, like tools, in the storage compartments. If they must be stored, wrap them in appropriate cushion material to prevent damaging the stor- age compartments. The front storage compartment is located at the front right side of the ATV.
  • Page 49 When storing any documents in the storage com- partments, be sure to wrap them in a plastic bag so that they will not get wet. When washing the ATV, be careful not to let any water enter the storage compartments. ●...

  • Page 50: Front Carrier

    EBU18962 Front carrier ● Do not exceed the load limit of 45.0 kg (99 lb) for the front carrier. ● Do not exceed the maximum load of 220.0 kg (485 lb) for the ATV. EBU18972 Rear carrier ● Do not exceed the load limit of 85.0 kg (187 lb) for the rear carrier.
  • Page 51 2. Position indicator EWB02730 WARNING The rear shock absorber assembly contains A special wrench can be obtained at a Yamaha highly pressurized nitrogen gas. If the shock dealer to make this adjustment. absorber assembly is damaged, it could ex- plode causing injury or property damage.

  • Page 52: Auxiliary Dc Jack

    Do not deform or damage the cylinder in any way. ● Do not dispose of a damaged or worn out shock absorber assembly yourself. Take the shock absorber assembly to a Yamaha deal- 1. Auxiliary DC jack cap er for any service. EBU19183 Auxiliary DC jack The auxiliary DC jack is located at the front right side of the ATV.
  • Page 53 Maximum rated capacity for the auxiliary DC jack: DC 12 V, 10 A (120 W) 5. Turn the accessory on. 6. When the auxiliary DC jack is not being used, cover it with the cap. ECB00120 NOTICE ● Do not use accessories requiring more than the above maximum capacity.

  • Page 54: Pre-Operation Checks

    Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in this manual, have the vehicle inspected by a Yamaha dealer. Before using this vehicle, check the following points:...
  • Page 55 ITEM ROUTINE PAGE • Check operation. If soft or spongy, have Yamaha dealer bleed hy- draulic system. • Check brake pads for wear, and replace if necessary. Front brake 5-3, 8-47, 8-48, 8-49 • Check brake fluid level in reservoir, and add specified brake fluid to specified level if necessary.

  • Page 56: Fuel

    They should move smoothly and there specified level. Add oil as necessary. (See page should be a firm feeling when the brakes are ap- 8-29.) plied. If not, have a Yamaha dealer check the brake system. EBU19631 Coolant Brake fluid level Make sure that the coolant is at the specified level.

  • Page 57: Throttle Lever

    (See page 8-47.) pressures to the following specifications: EBU19761 Throttle lever Check the operation of the throttle lever. It must open smoothly and spring back to the idle position when released. Have a Yamaha dealer correct if necessary.
  • Page 58 Recommended tire pressure: Front 35.0 kPa (0.350 kgf/cm², 5.0 psi) Rear 30.0 kPa (0.300 kgf/cm², 4.4 psi) Minimum tire pressure: Front 32.0 kPa (0.320 kgf/cm², 4.6 psi) Rear 27.0 kPa (0.270 kgf/cm², 4.0 psi) Maximum tire seating pressure: 1. Low-pressure tire gauge Front 250 kPa (2.5 kgf/cm², 36 psi) Tire wear limit...
  • Page 59 Use of improper tires on this ATV may cause loss of control, increasing your risk of an acci- dent. After extensive tests, only the tires listed below have been approved for this model by Yamaha Motor Manufacturing Corporation of America.

  • Page 60: Chassis Fasteners

    EBU19850 Rear: Instruments, lights and switches Manufacturer/model: Check that all instruments, lights and switches are YFM700FAPD CHENG SHIN/C828 working properly. Correct if necessary. YFM700FAPSED CHENG SHIN/C828 YFM7FGD MAXXIS/MU20 YFM7FGPAD MAXXIS/MU20 YFM7FGPD MAXXIS/MU20 YFM7FGPHD MAXXIS/MU20 YFM7FGPLED MAXXIS/MU20 YFM7FGPSED MAXXIS/MU20 Size: AT25 x 10-12 Type: Tubeless Aftermarket tires and rims...

  • Page 61: Operation

    The corresponding indicator light should come on. If the indicator light does not come ECB00150 NOTICE on, have a Yamaha dealer check the electrical circuit. See the “Engine break-in” section on page 6-4 prior to operating the engine for the first time.

  • Page 62: Operating The Drive Select Lever And Driving In Reverse

    ● The rear brake lever or brake pedal is applied EBU20441 Operating the drive select lever and with the drive select lever in any position. How- driving in reverse ever, it is recommended to shift into the neutral or park position before starting the engine. ECB00170 NOTICE 3.
  • Page 63 reverse, make sure there are no people or ob- stacles behind you. When it is safe to proceed, go slowly. 1. Bring the ATV to a complete stop. 2. Apply the brake pedal. The drive select lever cannot be shifted into or from reverse or park without applying the brake pedal.

  • Page 64: Engine Break-In

    320 km (200 mi) or 20 should come on. If the indicator light does not hours. The various parts in the engine wear and come on, have a Yamaha dealer check the elec- polish themselves to the correct operating clear- trical circuit.

  • Page 65: Parking

    If any engine trouble should occur during the steep you could not walk up them easily. engine break-in period, immediately have a 1. Bring the ATV to a stop by applying the Yamaha dealer check the ATV. brakes. 2. Stop the engine. EBU27321 Parking 3.

  • Page 66: Accessories And Loading

    Yamaha ability to control the ATV. vehicles. Yamaha is not in a position to test the ● Do not mount an accessory where it could inter- products that these aftermarket companies pro- fere with your ability to control the ATV.
  • Page 67 bulky object attached to the handlebars which ● Never exceed the weight limits shown. An over- could make steering difficult, an accessory that loaded ATV can be unstable. limits your ability to move around on the seat, or MAXIMUM LOADING LIMIT one that limits your view.
  • Page 68 just the load in the trailer, if necessary, to reduce the weight on the hitch. If you are carrying cargo and towing a trailer, include the tongue weight in the maximum ATV load limit. ● Load cargo on the carriers as close to the center of the ATV as possible.

  • Page 69: Riding Your Atv

    EBU21141 RIDING YOUR ATV...

  • Page 70: Getting To Know Your Atv

    RIDE WITH CARE AND GOOD JUDGMENT EBU27418 Get training if you are inexperienced. GETTING TO KNOW YOUR ATV EWB01381 This ATV is mainly for utility use, but may also be WARNING used for recreation. This section, Riding your ATV, ● Do not operate this ATV or allow anyone else provides general ATV riding instructions for recre- to operate it without proper instruction.
  • Page 71 Riding your ATV requires skills acquired through practice over a period of time. Do not attempt to operate at maximum perfor- mance until you are totally familiar with the ATV’s handling and performance characteristics. Take the time to learn the basic techniques well before attempting more difficult maneuvers.
  • Page 72 Apparel Always wear the following to reduce risk of injury in an accident: ● Approved motorcycle helmet that fits properly ● Eye protection (goggles, helmet face shield, or protective eyewear) ● Over-the-ankle boots, gloves, long-sleeved shirt or jacket, and long pants An approved helmet and other personal protective equipment can reduce the severity of injuries in an accident.
  • Page 73 1. Protective clothing Pre-operation checks 2. Goggles Always inspect your ATV each time you use it to 3. Gloves make sure the ATV is in safe operating condition. 4. Boots 5. Helmet Perform the pre-operation checks listed on page 5-1. Always follow the inspection and maintenance Do not operate after or while consuming alco- procedures and schedules described in the Own- hol or drugs.
  • Page 74 opening, even when the throttle lever is pushed to ● Do not exceed the maximum loading limits the maximum. Turning in the adjusting screw limits for the vehicle (see “MAXIMUM LOADING the maximum engine power available and de- LIMIT” in this section or vehicle labeling). ●...
  • Page 75 During operation MAXIMUM LOADING LIMIT Always keep your feet on the footboards during op- ATV loading limit (total weight of cargo, rider, eration; otherwise, they may contact the rear accessories, and tongue): wheels. WARNING! Removing even one hand 220.0 kg (485 lb) or foot can reduce your ability to control the Front carrier: ATV or could cause you to lose your balance...
  • Page 76 ATV should be during operation or after leaving the ATV, do not let genuine Yamaha or equivalent components de- brush, grass and other materials collect under the signed for use on this ATV and should be installed vehicle, near the muffler or exhaust pipe, or next to and used according to instructions.

  • Page 77: Be Careful Where You Ride

    To prevent burns, avoid touching the exhaust sys- BE CAREFUL WHERE YOU RIDE tem. Park the ATV in a place where pedestrians or This ATV is designed for use on unpaved surfaces children are not likely to touch it. only. WARNING! Paved surfaces may seriously affect handling and control of the ATV, and may cause the ATV to go out of control.
  • Page 78 know your country’s laws and regulations before ful when operating on unfamiliar terrain. Al- you ride on unpaved public streets or roads. Do not ways be alert to changing terrain conditions ride on any paved public street, road or motorway. when operating the ATV.
  • Page 79 loose terrain could cause loss of traction or ATV control, which could result in an accident, including an overturn. [EWB01541] Do not ride in areas posted “no trespassing”. Do not ride on private property without getting per- mission. When riding in an area where you might not easily be seen, such as desert terrain, mount a caution flag on the ATV.

  • Page 80: Turning Your Atv

    Select a large, flat, unpaved area to become famil- ECB00251 NOTICE iar with your ATV. Make sure that this area is free of obstacles and other riders. You should practice Do not shift from low-range to high-range or control of the throttle, brakes, shifting procedures, vice versa without coming to a complete stop.

  • Page 81: Climbing Uphill

    As you approach a curve, slow down and begin to may continue to go straight. If the ATV doesn’t turn the handlebars in the desired direction. As you turn, come to a stop and then practice the proce- do so, put your weight on the footboard to the out- dure again.
  • Page 82 ● Never operate the ATV on hills too steep for the ATV or for your abilities. The ATV can overturn more easily on extremely steep hills than on level surfaces or small hills. ● Always check the terrain carefully before you start up any hill.
  • Page 83 Do not attempt to climb hills until you have mas- If you are climbing a hill and you find that you have tered basic maneuvers on flat ground. Always not properly judged your ability to make it to the check the terrain carefully before attempting any top, you should turn the ATV around while you still hill.

  • Page 84: Riding Downhill

    uphill. Turn the ATV around and remount, following ● Always check the terrain carefully before the procedure described in the Owner’s Manual. you start down any hill. WARNING! Stalling, rolling backwards or im- ● Never operate the ATV on hills too steep for properly dismounting while climbing a hill the ATV or for your abilities.

  • Page 85: Crossing A Slope

    Use caution while descending a hill with loose or slippery surfaces. Braking ability and traction may be adversely affected by these surfaces. Improper braking may also cause a loss of traction. When this ATV is in “4WD”, all wheels (front and rear) are interconnected by the drive train.

  • Page 86: Crossing Through Shallow Water

    ● Shift your weight to the uphill side of the ATV. ● Never attempt to turn the ATV around on any hill until you have mastered the turning tech- nique as described in the Owner’s Manual on level ground. Be very careful when turning on any hill.
  • Page 87 The ATV can be used to cross slow moving, shal- ability. WARNING! Wet brakes may have re- low water of up to a maximum of 35 cm (14 in) in duced stopping ability, which could cause loss depth. Before entering the water, choose your path of control.
  • Page 88 1. Air filter case check hose 1. Storage compartment drain plug 1. Air filter case check hose 1. Storage compartment drain plug 7-20...

  • Page 89: Riding Over Rough Terrain

    cident. Be sure to keep your feet firmly mounted on the footboards at all times. Avoid jumping the ATV as loss of control and damage to the ATV may re- sult. SLIDING AND SKIDDING EWB01662 WARNING Skidding or sliding improperly may cause you to lose control of this ATV.

  • Page 90: What To Do If

    If the rear wheels of your ATV start to slide side- ways, control can usually be regained (if there is With practice, over a period of time, skill at con- room to do so) by steering in the direction of the trolled sliding can be developed.

  • Page 91: What To Do

    WHAT TO DO... ● If your ATV is traversing a sloping surface: ● If your ATV doesn’t turn when you want it to: Be sure to ride with your weight positioned to- Bring the ATV to a stop and practice the turning wards the uphill side of the ATV to maintain maneuvers again.

  • Page 92: Periodic Maintenance And Adjustment

    The intervals given in the periodic maintenance vice or while using the vehicle. If you are not fa- charts should be considered as a general guide miliar with vehicle service, have a Yamaha under normal riding conditions. However, DE- dealer perform the service.

  • Page 93: Owner's Manual And Tool Kit

    If you do not have the tools or experience required spective compartments under the seat. for a particular job, have a Yamaha dealer perform it for you. 1. Owner’s manual 2.

  • Page 94: Periodic Maintenance Chart For The Emission Control System

    However, keep in mind that if the ATV isn’t used for a long period of time, the month maintenance intervals should be followed. ● Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills. INITIAL...
  • Page 95 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 first (mi) (200) (800) (1600) (1600) (3200) hours √ √ √ Spark arrester • Clean.

  • Page 96: General Maintenance And Lubrication Chart

    However, keep in mind that if the ATV isn’t used for a long period of time, the month maintenance intervals should be followed. ● Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills. INITIAL...
  • Page 97 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 first (mi) (200) (800) (1600) (1600) (3200) hours • Check operation and correct if necessary. • Check brake pedal free play and adjust if neces- √ √...
  • Page 98 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 first (mi) (200) (800) (1600) (1600) (3200) hours Shock absorber as- • Check operation and correct if necessary. √ √ √ semblies • Check for oil leakage and replace if necessary. •...
  • Page 99 INITIAL EVERY month Whichev- CHECK OR MAINTENANCE ITEM er comes 1300 2500 2500 5000 first (mi) (200) (800) (1600) (1600) (3200) hours • Change. √ √ Final gear oil • Check ATV for oil leakage, and correct if neces- sary. •...
  • Page 100 EBU23071 ● Some maintenance items need more frequent service if you are riding in unusually wet, dusty, sandy or muddy areas, or at full-throttle. ● Hydraulic brake service • Regularly check and, if necessary, correct the brake fluid level. • Every two years replace the internal components of the brake master cylinders and calipers, and change the brake fluid.

  • Page 101: Removing And Installing Panels

    EBU23090 Removing and installing panels The panels shown need to be removed to perform some of the maintenance jobs described in this chapter. Refer to this section each time a panel needs to be removed and installed. 1. Panel E 2.
  • Page 102 Panel B To remove the panel 1. Remove panel A. 2. Remove the front carrier by removing the bolts. 1. Panel A To install the panel Place the panel in the original position. 1. Carrier bolt (under the fenders) 8-11...
  • Page 103 1. Front carrier 1. Front carrier stay 2. Carrier bolt (top) 3. Remove the front carrier stays by removing the bolts. 1. Front carrier stay bolt 4. Remove the quick fasteners, and then pull the panel upward to remove it. 8-12...
  • Page 104 1. Panel B 2. Install the front carrier stays by installing the 2. Quick fastener bolts and tightening them to the specified torque. To install the panel 1. Place the panel in the original position, and Tightening torque: then install the quick fasteners. Front carrier stay bolt: 34 Nm (3.4 m·kgf, 25 ft·lbf) 3.
  • Page 105 To install the panel Tightening torques: 1. Place the panel in the original position, and Carrier bolt (top): then install the quick fastener screws. 34 Nm (3.4 m·kgf, 25 ft·lbf) Carrier bolt (under the fenders): 7 Nm (0.7 m·kgf, 5.1 ft·lbf) 4.
  • Page 106 1. Panel D 1. Panel E 2. Quick fastener screw 2. Quick fastener screw 1. Bolt 1. Bolt 8-15...
  • Page 107 To install a panel Panels F and G 1. Place the panel in the original position, and To remove a panel then install the bolt and quick fastener screw. 1. Remove the panel bolts, footboard bolt, and footboard nut. 2. Pull the panel downward while pushing the projection.
  • Page 108 1. Panel G 2. Footboard nut 3. Footboard bolt 4. Panel bolt 5. Projection To install a panel 1. Place the panel in the original position. 2. Install the bolts and nut, and then tighten them to the specified torques. 8-17...
  • Page 109 Tightening torques: Panel bolt: 4.0 Nm (0.40 m·kgf, 2.9 ft·lbf) Footboard nut: 4.0 Nm (0.40 m·kgf, 2.9 ft·lbf) Panel H To remove the panel 1. Remove the seat. (See page 4-18.) 2. Remove the rear carrier by removing the 1. Rear carrier bolts.
  • Page 110 3. Remove the quick fasteners, and then push inward on the areas shown. 2. Install the rear carrier by installing the bolts and tightening them to the specified torques. 1. Panel H 2. Quick fastener Tightening torques: Carrier bolt (upper): To install the panel 53 Nm (5.3 m·kgf, 38 ft·lbf) 1.

  • Page 111: Removing The Radiator Grills

    EBU28671 EBU23213 Removing the radiator grills Checking the spark plug The radiator grills can be removed to access the The spark plug is an important engine component, radiator for cleaning. which is easy to check. Since heat and deposits will cause any spark plug to slowly erode, the spark To remove a radiator grill plug should be removed and checked in accor- Remove the quick fastener, pull the radiator grill...
  • Page 112 Do not attempt to diagnose such problems yourself. In- stead, have a Yamaha dealer check the ATV. 2. Check the spark plug for electrode erosion and excessive carbon or other deposits, and replace it if necessary.

  • Page 113: Engine Oil And Oil Filter Cartridge

    Tightening torque: Spark plug: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) If a torque wrench is not available when installing the spark plug, a good estimate of the correct torque is 1/4–1/2 turn past finger tight. However, the spark plug should be tightened to the specified torque as soon as possible.
  • Page 114 If the engine was started before checking the oil level, be sure to warm up the engine sufficiently, and then wait at least 10 minutes until the oil settles for an accurate reading. 3. Remove the access cover by turning it coun- terclockwise.
  • Page 115 To change the engine oil (with or without oil fil- ter cartridge replacement) 1. Place the ATV on a level surface. 2. Remove the access cover by turning it coun- terclockwise. 3. Place an oil pan under the engine to collect the used oil.
  • Page 116 1. Oil filter cartridge 2. Oil filter wrench An oil filter wrench is available at a nearby Yamaha dealer. 7. Apply a thin coat of engine oil to the O-ring of the new oil filter cartridge.
  • Page 117 11. Refill with the specified amount of the recom- mended engine oil, and then insert the dip- stick completely into the oil filler hole. Recommended oil: See page 10-1. Oil quantity: Without oil filter cartridge replacement: 2.00 L (2.11 US qt, 1.76 Imp.qt) With oil filter cartridge replacement: 2.10 L (2.22 US qt, 1.85 Imp.qt) 1.

  • Page 118: Final Gear Oil

    1. Final gear oil age before each ride. If any leakage is found, have 2. Gasket a Yamaha dealer check and repair the ATV. In ad- 3. Final gear oil level check bolt dition, the final gear oil level must be checked and 4.
  • Page 119 To change the final gear oil 1. Place the ATV on a level surface. 2. Place an oil pan under the final gear case to collect the used oil. 3. Remove the final gear oil filler bolt, the final gear oil level check bolt, the final gear oil drain bolt and their gasket to drain the oil from the final gear case.

  • Page 120: Differential Gear Oil

    The differential gear case must be checked for oil leakage before each ride. If any leakage is found, 1. Final gear oil have a Yamaha dealer check and repair the ATV. 2. Gasket In addition, the differential gear oil level must be 3.
  • Page 121 To check the differential gear oil level 5. Install the oil filler bolt and its gasket, and then 1. Place the ATV on a level surface. tighten the bolt to the specified torque. 2. Remove the differential gear oil filler bolt and Tightening torque: its gasket, and then check the oil level in the Differential gear oil filler bolt:...
  • Page 122 1. Differential gear oil drain bolt 1. Differential gear oil filler bolt 2. Gasket 2. Gasket 3. Differential gear oil 4. Install the drain bolt and its new gasket, and 4. Correct oil level then tighten the bolt to the specified torque. Recommended differential gear oil: Tightening torque: See page 10-1.

  • Page 123: Coolant

    8. Check the differential gear case for oil leak- age. If oil is leaking, check for the cause. EBU23470 Coolant The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart.
  • Page 124 ● The radiator fan is automatically switched on or a Yamaha dealer check the antifreeze con- off according to the coolant temperature in the tent of the coolant as soon as possible, radiator.
  • Page 125 1. Footboard 1. Coolant drain bolt 2. Bolt and nut 2. Gasket 3. Bolt 4. Place a container under the engine, and then remove the coolant drain bolt and its gasket. (Use a trough or a similar object as shown to prevent coolant from spilling on the engine guard.) 1.
  • Page 126 6. Remove the radiator cap. 1. Coolant reservoir hose 1. Radiator cap 9. After draining the coolant, thoroughly flush the 7. Remove the coolant reservoir cap. cooling system with clean tap water. 8. Disconnect the coolant reservoir hose on the 10.
  • Page 127 13. Pour the recommended coolant into the reser- voir to the maximum level mark, and then in- stall the reservoir cap. NOTICE: antifreeze with distilled water only. Howev- er, if distilled water is not available, soft water may be used for refilling. Do not use hard water or salt water since they are harmful to the engine.
  • Page 128 1. V-belt cooling duct 1. Cylinder head air bleed bolt 2. Clamp screw 19. When coolant begins to flow out of the bolt 18. Loosen the cylinder head air bleed bolt, with- hole, tighten the cylinder head air bleed bolt to out removing it, to allow all of the air to escape the specified torque.
  • Page 129 24. Start the engine, and then check for coolant leakage. If any leakage is found, have a Yamaha dealer check the cooling system. 1. Footboard nut 25. Install the V-belt cooling duct, and then tighten 2.

  • Page 130: Cleaning The Air Filter Element

    EBU27806 Cleaning the air filter element The air filter element should be cleaned at the in- tervals specified in the periodic maintenance and lubrication chart. Clean or, if necessary, replace the air filter element more frequently if you are riding in unusually wet or dusty areas. There are two check hoses at the bottom of the air filter case, which are located behind panels D and E.
  • Page 131 3. Remove the air filter case cover by unhooking the holders. 1. Air filter case check hose 1. Air filter case cover holder 2. Air filter case cover 4. Remove the sponge material and the air filter mesh from the air filter case. 1.
  • Page 132 8. Check the sponge material and replace it if 2. Air filter mesh damaged. 9. Apply Yamaha foam air filter oil or other qual- 5. Clean the mesh with solvent, and then wipe ity foam air filter oil to the sponge material.
  • Page 133 The sponge material should be wet but not drip- ping. 10. Install the mesh and the sponge material into the air filter case. NOTICE: Make sure that the air filter element is properly seated in the air filter case. Never operate the engine with the air filter element removed.

  • Page 134: Cleaning The Spark Arrester

    13. Install the panel. The air filter element should be cleaned every 20– 40 hours. It should be cleaned and lubricated more often if the ATV is operated in extremely dusty ar- eas. Each time the air filter element maintenance is performed, check the air inlet of the air filter case for obstructions.
  • Page 135 1. Tailpipe 1. Purging bolt 2. Spark arrester 2. Gasket 3. Gasket 8. Start the engine and rev it up approximately 4. Check the gasket for damage, and replace it if twenty times while momentarily creating ex- necessary. haust system back pressure by blocking the 5.

  • Page 136: V-Belt Case Drain Plug

    Tightening torque: Purging bolt: If water drains from the V-belt case after removing 27 Nm (2.7 m·kgf, 20 ft·lbf) the plug, have a Yamaha dealer check the ATV as the water may affect other engine parts. EWB02380 WARNING Never run the engine in an enclosed area when...

  • Page 137: Valve Clearance

    (a). To decrease the throttle lever free must be adjusted by a Yamaha dealer at the inter- play, turn the adjusting bolt in direction (b). vals specified in the periodic maintenance and lu- brication chart.

  • Page 138: Checking The Front And Rear Brake Pads

    If a brake pad has Rear brake worn to the point that the wear indicator groove has almost disappeared, have a Yamaha dealer re- place the brake pads as a set. The wheels need to be removed to check the brake pads.

  • Page 139: Checking The Brake Fluid Level

    Rear brake EBU29841 Checking the brake fluid level Before riding, check that the brake fluid is above the minimum level mark. Check the brake fluid lev- el with the top of the reservoir level. Replenish the brake fluid if necessary. Front brake 1.

  • Page 140: Changing The Brake Fluid

    Use only the specified brake fluid; otherwise, EBU24291 Changing the brake fluid the rubber seals may deteriorate, causing Have a Yamaha dealer change the brake fluid at leakage. the intervals specified in the TIP after the periodic ● Refill with the same type of brake fluid. Add- maintenance and lubrication chart.

  • Page 141: Adjusting The Brake Pedal Free Play

    Front brake EBU29072 Adjusting the brake pedal free play The brake pedal free play must be adjusted at the intervals specified in the periodic maintenance and lubrication chart. ● Always perform this maintenance completely in the following order whenever adjusting the rear brake.
  • Page 142 1. Brake pedal free play 1. Locknut 2. Brake pedal free play adjusting nut 1. Remove panel G. (See page 8-10.) 4. Tighten the locknut. 2. Loosen the locknut. 5. After adjusting, there should be slight play at 3. Turn the brake pedal free play adjusting nut in the brake pedal cable joint as shown.

  • Page 143: Axle Boots

    Check the axle boots for tears or damage. If any damage is found, have them re- placed by a Yamaha dealer. 1. Brake pedal cable joint 2. Slight play (0.1–0.5 mm [0.004–0.02 in]) 6.

  • Page 144: Checking And Lubricating The Cables

    If a cable is damaged or does not move The operation of the front and rear brake levers smoothly, have a Yamaha dealer check or replace should be checked before each ride, and the lever pivots should be lubricated if necessary.

  • Page 145: Checking And Lubricating The Brake Pedal

    Front brake lever EBU28832 Checking and lubricating the brake pedal The operation of the brake pedal should be checked before each ride, and the pedal pivot should be lubricated if necessary. To access the brake pedal pivot, remove panel G. (See page 8-10.) Recommended lubricant: Lithium-soap-based grease...

  • Page 146: Checking The Wheel Hub Bearings

    If there is play lubrication chart. in a wheel hub or if a wheel does not turn smoothly, have a Yamaha dealer check the wheel hub bear- For parts equipped with a grease nipple, use a ings.

  • Page 147: Lubricating The Steering Shaft

    EBU25092 EWB02160 Lubricating the steering shaft WARNING The steering shaft must be lubricated by a Yamaha Battery electrolyte is poisonous and danger- dealer at the intervals specified in the periodic ous, as it contains sulfuric acid, which can maintenance and lubrication chart.
  • Page 148 To remove the battery 1. Remove panel A. (See page 8-10.) 2. Remove the front carrier by removing the bolts. 1. Front carrier 2. Carrier bolt (top) 3. Remove the battery holding plate by removing the nuts. 1. Carrier bolt (under the fenders) 4.
  • Page 149 Always keep the battery charged. Storing a dis- To charge the battery charged battery can cause permanent battery Have a Yamaha dealer charge the battery as soon damage. as possible if it seems to have discharged. Keep in mind that the battery tends to discharge more...

  • Page 150: Replacing A Fuse

    2. Connect the positive battery lead first, then Tightening torques: connect the negative battery lead by installing Carrier bolt (top): their bolt. NOTICE: When installing the bat- 34 Nm (3.4 m·kgf, 25 ft·lbf) tery, the main switch must be off, and the Carrier bolt (under the fenders): positive lead must be connected before 7 Nm (0.7 m·kgf, 5.1 ft·lbf)
  • Page 151 ECB00640 NOTICE To prevent accidental short-circuiting, turn off the main switch when checking or replacing a fuse. 2. Remove the blown fuse, and then install a new fuse of the specified amperage. WARNING! Always use a fuse of the spec- ified rating, and never use a substitute ob- ject in place of the proper fuse.

  • Page 152: Replacing A Headlight Bulb

    Specified fuses: trical circuits to check if the devices operate. Main fuse: 4. If the fuse immediately blows again, have a 40.0 A Yamaha dealer check the electrical system. Headlight fuse: 10.0 A EBU27443 Ignition fuse: Replacing a headlight bulb 10.0 A...
  • Page 153 4. Unhook the headlight bulb holder, and then remove the burnt-out bulb. 1. Headlight bulb cover 3. Disconnect the headlight coupler. 1. Headlight bulb holder 2. Headlight bulb 5. Place a new headlight bulb into position, and then secure it with the bulb holder. NOTICE: Do not touch the glass part of the head- light bulb to keep it free from oil, otherwise the transparency of the glass, the luminos-...

  • Page 154: Adjusting A Headlight Beam

    Adjusting a headlight beam 1. Remove panel H. (See page 8-10.) ECB00690 2. Remove the tail/brake light bulb holder (to- NOTICE gether with the bulb) by turning it counter- It is advisable to have a Yamaha dealer make clockwise. this adjustment. 8-63...

  • Page 155: Removing A Wheel

    4. Insert a new bulb into the bulb holder, push it in, and then turn it clockwise until it stops. 5. Install the bulb holder (together with the bulb) by turning it clockwise. 6. Install the panel. EBU25651 Removing a wheel 1.

  • Page 156: Installing A Wheel

    EBU25701 Installing a wheel 1. Place the ATV on a level surface. 2. Install the wheel and the nuts. ● The arrow mark on the tire must point toward the rotating direction of the wheel. ● Tapered nuts are used for both the front and rear wheels.

  • Page 157: Troubleshooting

    However, should your ATV re- quire any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, expe- rience, and know-how to service the ATV properly.

  • Page 158: Troubleshooting Charts

    Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the ATV. Check the battery. 4. Battery The engine turns over The battery is good.
  • Page 159 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the rec- ommended coolant as soon as possible.

  • Page 160: Cleaning And Storage

    EBU25860 CLEANING AND STORAGE tion of wheel bearings, brakes, transmis- EBU25881 Cleaning sion seals and electrical devices. Many Frequent, thorough cleaning of your ATV will not expensive repair bills have resulted from only enhance its appearance but will improve its improper high-pressure detergent applica- general performance and extend the useful life of tions such as those available in coin-oper-...

  • Page 161: Storage

    3. Perform the following steps to protect the cyl- EBU27261 Storage inder, piston rings, etc. from corrosion. a. Remove the spark plug cap and spark Short-term plug. Always store your ATV in a cool, dry place and, if b. Pour a teaspoonful of engine oil into the necessary, protect it against dust with a porous spark plug bore.
  • Page 162 6. Cover the muffler outlet with a plastic bag to prevent moisture from entering it. 7. Remove the battery and fully charge it. Store it in a cool, dry place and charge it once a month. Do not store the battery in an exces- sively cold or warm place [less than 0 °C (30 °F) or more than 30 °C (90 °F)].

  • Page 163: Specifications

    EBU25961 SPECIFICATIONS Dimensions: Vibration on seat (EN1032, ISO5008): YFM7FGD Will not exceed 0.5 m/s² Overall length: YFM7FGPAD Will not exceed 0.5 m/s² 2065 mm (81.3 in) YFM7FGPD Will not exceed 0.5 m/s² Overall width: YFM7FGPHD Will not exceed 0.5 m/s² 1180 mm (46.5 in) YFM7FGPLED Will not exceed 0.5 m/s²...
  • Page 164 Engine oil: Quantity: 0.20 L (0.21 US qt, 0.18 Imp.qt) Recommended brand: Differential gear oil: YAMALUBE Type: Type: SAE 5W-30, 10W-30, 10W-40, 15W-40, 20W-40 or 20W- SAE 80 API GL-4 Hypoid gear oil Quantity: 0.22 L (0.23 US qt, 0.19 Imp.qt) Cooling system: 130 ˚F Coolant reservoir capacity (up to the maximum level mark):...
  • Page 165 Fuel injection: Chassis: Throttle body: Frame type: ID mark: Steel tube frame 43PG 10 Caster angle: Spark plug (s): 5.0 ° Trail: Manufacturer/model: 26.0 mm (1.02 in) NGK/LMAR6A-9 Front tire: Spark plug gap: 0.8–0.9 mm (0.031–0.035 in) Type: Clutch: Tubeless Size: Clutch type: AT25 x 8-12...
  • Page 166 Manufacturer/model: Rear wheel: YFM700FAPD CHENG SHIN/C828 Wheel type: YFM700FAPSED CHENG SHIN/C828 Panel wheel YFM7FGD MAXXIS/MU20 Rim size: YFM7FGPAD MAXXIS/MU20 12 x 7.5AT YFM7FGPD MAXXIS/MU20 Front brake: YFM7FGPHD MAXXIS/MU20 Type: YFM7FGPLED MAXXIS/MU20 Disc brake YFM7FGPSED MAXXIS/MU20 Operation: Loading: Right hand operation Maximum loading limit: Specified brake fluid: 220.0 kg (485 lb)
  • Page 167 Wheel travel: EPS warning light: 230 mm (9.1 in) YFM700FAPD LED Electrical system: YFM700FAPSED LED YFM7FGPAD LED Ignition system: YFM7FGPD LED YFM7FGPHD LED Charging system: YFM7FGPLED LED AC magneto YFM7FGPSED LED Battery: Park indicator light: Model: YTX20L-BS On-Command four-wheel-drive/differential gear lock Voltage, capacity: indicator: 12 V, 18.0 Ah...
  • Page 168 Headlight fuse: sure level can vary from country. This information, 10.0 A however, will enable the user of the machine to Signaling system fuse: make a better evaluation of the hazard and risk. 5.0 A Ignition fuse: 10.0 A Auxiliary DC jack fuse: 10.0 A Four-wheel-drive motor fuse: 10.0 A...

  • Page 169: Consumer Information

    Record the vehicle identification number and mod- el label information in the spaces provided below for assistance when ordering spare parts from a Yamaha dealer or for reference in case the ATV is stolen. VEHICLE IDENTIFICATION NUMBER: 1. Vehicle identification number (front left side)
  • Page 170 1. Model label 11-2...
  • Page 171 INDEX Drive select lever and driving in reverse ......6-2 Drive select lever safety system cable, adjusting ..8-46 Accessories and loading ..........6-6 Accessories, auxiliary jack ........... 4-23 Air filter element, cleaning ..........8-39 Engine break-in .............. 6-4 Axle boots ..............8-52 Engine oil ...............
  • Page 172 Light switch ..............4-8 Spark plug, checking ............ 8-20 Low-range indicator light ..........4-2 Specifications ............... 10-1 Speed limiter ..............4-13 Stabilizer bushes, checking .......... 8-55 Main switch ..............4-1 Starting the engine ............6-1 Maintenance and lubrication chart ......... 8-5 Start switch ..............
  • Page 174 EBU26172 WARNING Improper ATV use can result in SEVERE INJURY or DEATH. ALWAYS USE NEVER CARRY NEVER USE NEVER USE AN APPROVED PASSENGERS WITH DRUGS ON PAVED HELMET AND ROADS OR ALCOHOL PROTECTIVE GEAR NEVER ALWAYS operate: • without proper training or instruction. •...

This manual is also suitable for:

Yfm7fgdYfm7fgpdYfm7fgpadYfm7fgpsedYfm7fgpledYfm700fapd ... Show all

Table of Contents