AEG 30" B3007H-L-B User Manual page 9

30” built-in oven
Table of Contents

Advertisement

2.3 Switching the oven ON / OFF
Touch and release the button 3, the timer display shows "On"
After two sec the oven light and the program display are on. If after one minute a cooking
program is not activated, the oven light switches OFF and the oven goes in off position and
the display shows "OFF"
During cooking, to turn off the oven, touch and release the button 3
If "Children Care" function is selected, the button release must take place at least after 2 sec.,
to protect accidental shutdowns. If "Children Care" is not active, the release may be
instantaneous.
Turning off the oven is actually two sec. after the appearance of the message "OFF": if the
button is pressed accidentally , simply press it again to "undo" the effect.
WARNING - IMPORTANT NOTE
Do not turn the oven off if you have set it for automatic or semi-automatic cooking.
This operation will cancel the programmed cooking. Only the timer ( minute minder)
operates in the "stand-by" condition.
CHILDLOCK SAFETY ( ON SOME MODELS )
To activate the Childlock option touch the "
shows "n--0" and then "On".
Then the time of the day appears again. The temperature display shows "
When the Childlock option has been selected it is only possible to show programmes.
In this setting it is not possible to change the oven cooking programme (cooking function,
temperature) and the time selected for a semi-automatic or automatic cooking: if touching the
relative keys "n--0" appears on the central display. If the oven is turned off (stand-by mode) it is
only possible to operate the timer. To deactivate the "Childlock" option touch the "
hold until the clock/programmer display shows "n--0" and then "OFF".
Then the time of the day appears again. On the temperature display the "
IMPORTANT: If the oven has been switched OFF (stand-by mode) with the Childlock
option selected it is possible to turn ON the oven only after having deactivated the
Childlock
.
3.1 Minute minder
This function does not interact with the loads, and is always available regardless the
status of the oven. Pressing the button 6 the bell symbol is lighted.
Set the time with the buttons 4 and 5, up to a maximum of 180 minutes, after 4 sec. the
information is accepted and the bell remains lit.
Pressing the button 6 after changing the value brings back to a timer clock mode,
accepting the value you just changed.
When the time elapsed, a tone sounds combined with the symbol bell flashes. To end
both signals simply press any button.
During minute minder setting step, it is possible to cancel the current value by
pressing the button 3.
" key and hold until the clock/programmer display
".
" key and
" symbol goes out.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents