AEG 30" B3007H-L-B User Manual page 23

How to Rotate Doors in the Double and Single Oven
NOTE: Side Opening Only
This should only be done by a qualified person or installer. We recommend that it be a two
person task to ensure support of the heavy door apparatus during changeover. Damage done to
the appliance during a door rotation may effect the warranty provision for the appliance.
Stage1: REMOVE THE BOTTOM DOOR FOR DOUBLE OVEN OR THE MAIN DOOR FOR
SINGLE OVEN
a) Remove the screws fixing the hinge to the oven front frame, being careful to
support the door, then remove the door and place in a safe place
b) Remove the door catch by removing the two screws top and bottom of the door
latch on the opposite side of the oven front frame to the hinges
c) Remove the screws fitted in the thread holes in the oven front frame to allow the re-
positioning of the door hinge to the opposite side
Stage 2: (FOR DOUBLE OVENS ONLY) REMOVE THE TOP DOOR AS PER STAGE 1
ABOVE AND LEAVE IN POSITION THE FITTED MIDDLE SPACER
4. Remove the screws fixing the bracket of the middle spacer profile
5. Remove the screws fixing the hinge of the top door
6. Remove the door with the middle profile fixed to the hinge, rotate 180° place in a safe
place ready for re-affixing
Stage 3: FITTING THE DOORS – FOR DOUBLE OVENS AND SINGLE OVENS
7. For Double Oven re-fit the bottom door first by fixing the hinges with their screws; fix
also the bracket of the middle spacer profile at the same time
8. Re-fit the top door after having rotated it by 180°
9. Re-fit the two door catches in the appropriate oven front frame position – minor
adjustment available later to ensure accurate receipt of door striker pin
10. Re-fit the remaining screws in the thread holes in the oven front frame
The changeover is complete – please check that all screws are fully tightened and that the
striker pin is accurately received by the re-located door latch.
Changing the light globe
The light globe is located behind the glass cover and is a screw-in type.
To change a light globe:
1- Gently lever out the glass cover only.
2- Pull the light globe and push in a replacement globe.
3- Replace the glass cover making sure it fits correctly into place.
NOTE:
Recommended globe: Halogen 40W
23