Installation; Installation Location - AEG SANTO Operating Instructions Manual

Remove the transport fittings from
the storage shelves:
0 Slide the fittings securing the shelf
forward to the thicker section on
the edge of the storage shelf.
0 Slide the storage shelf far enough
forward so that it can be hinged
downwards and the fittings can be
removed from the guides.

Installation

Installation Location

The appliance should be installed in a well ventilated, dry room.
Energy use and efficient performance of the appliance is affected by
the ambient temperature.
The appliance should therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature corre-
sponds to the climate classification, for which the appliance is desi-
gned.
The climate classification can be found on the rating plate, which is
located at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for
each climate classification:
Climate classification
818 1703-01/1
SN
N
ST
T
for an ambient temperature of
+10 to +32 °C
+16 to +32 °C
+18 to +38 °C
+18 to +43 °C
9