S
I
H U T T E R
N S T A L L A T I O N
Figure 10.1
Turnbutton
Shutter
Fan Housing
Turnbuttons should be mounted with supplied #10 x 1-1/2" self-drill screws, spaced evenly (refer to Figure 10.1 above), with 3 per
side with 3/16" spacer washer in between housing and the turnbutton.
If you do not wish to use the turnbuttons, you may secure the shutter to the fan with #10 x ½" sheet metal screws, which are
standard hardware items, available locally.
PNEG 1433
54" Galvanized Slant Wall Fan Installation Operation Manual
- 10 -