First Use; Set The Water Softener - Electrolux ESF65010 User Manual

Rinse aid
1)
1) The salt and rinse aid indicator lights are never on while a washing programme is running even if filling
with salt and/or rinse aid is necessary.
The digital display
The digital display indicates:
• the countdown for the delay start,
• if the appliance is in setting mode,
• if a washing programme is set.
Function buttons
The following functions can be set using
these buttons:
• setting the water softener level,
• cancelling a washing programme or a de-
lay start in progress,
• activation/deactivation of the Multitab
function,
• activation/deactivation of the rinse aid
dispenser when Multitab function is active.
Setting mode
Press the On/Off button. If ALL programme
button lights come on and the digital display
shows 3 horizontal bars, the appliance is in
setting mode.

First use

Before using your dishwasher for the first
time:
• Ensure that the electrical and water con-
nections comply with the installation in-
structions
• Remove all packaging from inside the ap-
pliance
• Set the water softener level

Set the water softener

The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water hard-
ness is measured in equivalent scales, Ger-
man degrees (dH°), French degrees (°TH)
and mmol/l (millimol per litre - international
unit for the hardness of water).
Indicator lights
Comes on when the rinse aid has run out.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the rinse aid,
the appliance MUST be in setting mode.
Press the On/Off button. If a programme but-
ton light comes on and the digital display
shows 1 horizontal bar, the last performed or
selected programme is still set. In this case,
to return to setting mode, the programme
has to be cancelled.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the two func-
tion buttons B and C until all the programme
button lights come on and the digital display
shows 3 horizontal bars. The programme
has been cancelled and the machine is now
in setting mode.
• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: ''3 in 1'', ''4 in 1'', ''5
in 1'' etc... set the Multitab function.
(See ''Multitab function'').
The softener should be adjusted according
to the hardness of the water in your area.
Your local Water Authority can advise you on
the hardness of the water in your area.
The water softener must be set in two
ways: manually, using the water hard-
ness dial and electronically.
electrolux 5