Carrying Out An Emergency Drain - Electrolux Swissline GL EWF 1387 User Information

Table of Contents

Advertisement

After the last rinse foam can still be seen.
• Modern detergents may create foam even in the last rinse cycle. The
washing is however sufficiently rinsed.
There are white residues on the washing.
• This is due to the insoluble ingredients in modern detergents.
They are not caused by insufficient rinsing.
Shake or brush the washing. If possible turn the washing inside out before
washing. Check your choice of detergent. Especially with dark colours it is
advisable to use liquid detergents.

Carrying out an emergency drain

Warning! Before emergency draining, switch off the washing machine and
remove the mains plug from the socket.
Warning! The water that comes out of the emergency drain hose may be
hot. There is a risk of scalding. Let the water cool before performing an
emergency drain.
1. Open the plinth flap and remove it.
2.Take out the emergency drain hose.
3.Place a shallow container underneath
it. Then loosen the drain plug by turn-
ing it in an anti-clockwise direction and
pull it out.
4.The water runs out. If it is necessary to
empty the container more than once,
seal up the emergency drain hose with
the drain plug while you are doing so.
When the water has all drained away:
5.Push the drain plug firmly into the emergency drain hose and screw it tight
in a clockwise direction.
6.Place the emergency drain hose back in the support.
7.Insert the plinth flap and close it.
22

Advertisement

Table of Contents
loading

Table of Contents