Table of Contents
Advertisement
Chapter 3
Entering Setup
Power on the computer and the system will start POST (Power On
Self Test) process. When the message below appears on the screen, press
<DEL> key to enter Setup.
Hit DEL if you want to run SETUP
If the message disappears before you respond and you still wish to
enter Setup, restart the system by turning it OFF and On or pressing the
RESET button. You may also restart the system by simultaneously pressing
<Ctrl>, <Alt>, and <Delete> keys.
Control Keys
< >
< >
< >
< >
<Enter>
<Esc>
<+/PU>
<-/PD>
<F1>
<F5>
<F6>
<F7>
<F10>
Move to the previous item
Move to the next item
Move to the item in the left hand
Move to the item in the right hand
Select the item
Jumps to the Exit menu or returns to the main menu from a submenu
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page
Setup Menu
Restore the previous CMOS value from CMOS, only for Option Page
Setup Menu
Load the default CMOS value from Fail-Safe default table, only for
Option Page Setup Menu
Load Optimized defaults
Save all the CMOS changes and exit
3-2
Advertisement
Table of Contents
