Table of Contents
Advertisement
Introducing the BIOS
OS Select For DRAM > 64MB:
Two options are available: Non-OS2 or OS2. The default setting is Non-OS2. When the system memory
is bigger than 64MB, the communication method between the BIOS and the operating system will differ
from one operating system to another. If you use OS/2, select OS2; if you are using another operating
system, select Non-OS2.
Report No FDD For WIN 95:
Two options are available: No or Yes. The default setting is No.When using Windows
floppy drive set this item to Yes. Otherwise, set it to No.
Video BIOS Shadow:
Two options are available: Disabled or Enabled. The default setting is Enabled. This option is used to
define whether the BIOS on the video card uses the shadow feature or not. You should set this option to
Enabled, otherwise the display performance of the system will greatly decrease.
What is the SHADOW? The BIOS of standard video or interface cards is stored in ROM, and it is
often very slow. With the Shadow feature, the CPU reads the BIOS on the VGA card and copies it
into RAM. When the CPU runs this BIOS, the operation is speeded up.
Delay IDE Initial (Secs):
This item is used to support some old models or special types of hard disks or CD-ROMs. They may need
a longer amount of time to initialize and prepare for activation. Since the BIOS may not detect those
kinds of devices during system booting. You can adjust the value to fit such devices. Larger values will
give more delay time to the device. The minimum number you can enter is 0, the maximum number you
can enter is 15. The default setting is 0.
Full Screen LOGO Show:
Two options are available: Disabled or Enabled. The default setting is Disabled. This will show the ABIT
logo on full screen when you start your computer.
Small Logo(EPA) Show:
Two options are available: Disabled or Enabled. The default setting is Disabled. If you set to Enabled,
when computer reboot then you can see the EPA logo on the up right corner of the screen.
Computer Knowledge: SHADOW
3-13
®
95 without a
User's Manual
Advertisement
Table of Contents
Troubleshooting
