2-4
5. Push down the Retention Lock at both sides of the Fan and Retention Mechanism
Assembly to lock up together with the Retention Module Base.
6. The Fan and Retention Mechanism Assembly and Retention Module Base should
now firmly lock up with each other with the heatsink inside.
ATTENTION: Do not forget to set the correct bus frequency and multiple for your
processor.
2.4. System Memory
This server board provides two 184-pin Double Data Rate (DDR) Dual Inline
Memory Module (DIMM) slots for PC1600/PC2100 un-buffered low profile memory
modules with memory expansion size up to 2GB.
2.4.1.
Memory Configuration Table
DIMM
1
2
SI-1Ns
DIMM Module
128MB, 256MB, 512MB, 1GB
128MB, 256MB, 512MB, 1GB
Total System Memory
Chapter 2
Total Memory
128MB ~ 1GB
128MB ~ 1GB
128MB ~ 2GB
Need help?
Do you have a question about the SI-1NS and is the answer not in the manual?
Questions and answers