Abit KR7A-133R User Manual page 27

Installing the Motherboard
(12). D14, D16 and D17 LEDs Indicator: Status LEDs indicators
Figure 2-11 shows the KR7A-133/KR7A-133R back panel connectors, these connectors are for
connection to outside devices to the motherboard. We will describe which devices will attach to these
connectors below.
(13). PS/2 Keyboard Connector
(14). PS/2 Mouse Connector
Attach a PS/2 mouse to this 6-pin Din-connector.
Figure 2-11. KR7A-133/KR7A-133R back panel connectors
Attach a PS/2 keyboard connector to this 6-pin Din-connector.
If you use an AT keyboard, you can go to a computer store to
purchase an AT to ATX converter adapter, then you can
connect your AT keyboard to this connector. We suggest you
use a PS/2 keyboard for best compatibility.
There are three indicators on the motherboard.
D14 is a standby power indicator. When the +5VSB
supplies power to the motherboard, this LED
indicator will light up.
D16 is a power on indicator. When the power button
is pressed, this LED indicator will light up.
D17 is a reset indicator. When you press the reset
button, this LED indicator will light up. If you
release the reset button, this indicator will turn off.
2-17
User's Manual