Input Menu; Computer 1: Rgb/Component /Rgb (Scart)/S-Video; Computer 2: Rgb; Computer 2 Rgb - Panasonic PT-LX26HE Operating Instructions Manual

Input menu

Select [Input] from the Main Menu (see
"Navigating through the menu" on page 34),
then select the item from the sub-menu.
Remote Control
Computer 1: RGB/Component
/RGB (Scart)/S-video
1 ) Press ▲▼ to select [Computer 1].
2 ) Press ► to access the submenu.
3 ) Press ▲▼ to select [RGB],
[Component], [RGB(Scart)] or
[S-video].
4 ) Press the <SELECT> button.
When [Computer 1] is selected, [Component],
z
[RGB(Scart)] or [S-video] can be available.

Computer 2: RGB

Press ▲▼ to select [Computer 2 (RGB)]
and then press the <SELECT> button.
Computer System Selection
J
This projector automatically tunes to various types
of computers with its [Multi-scan system] and [Auto
PC Adjustment]. If a computer is selected as a signal
source, this projector automatically detects the signal
format and tunes to project a proper image without
any additional settings. (Signal formats provided in
this projector are shown on pages 69-71.)
When the projector can not recognize the
AUTO
connected signal conforming to the provided
PC Systems, Auto is displayed on the
System Menu box and the [Auto PC
Control Panel
adjustment] function works to display proper
images. If the image is not projected
properly, a manual adjustment is required.
There is no signal input from the computer.
- - - -
Check the connection between your
computer and the projector.
The preset system is manually adjusted in
Mode 1
the [PC adjust] Menu. The adjusted data
can be stored in Mode 1-10.
PC Systems provided in this projector is
SVGA 1
chosen. The projector chooses a proper
system provided in the projector and
displays it.
* Mode 1 and SVGA 1 are examples.
1 ) Press ▲▼ to select [System].
2 ) Press ► or the <SELECT> button to
access the submenu.
3 ) Press ▲▼ to select the desired system.

Video

Press ▲▼ to select [Video] and then
press the <SELECT> button.
Video System Selection
J
Video or S-video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When [Video System] is [PAL-M] or [PAL-N], select
the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among
[PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and
[PAL-N].
37
ENGLISH -