Panasonic KX-TVA50 Installation Manual page 80

2.15.2 Wall Mounting the AC Adaptor
Mounting on Concrete or Mortar Wall
CAUTION
When driving the mounting screws into the wall, be careful to avoid touching any metalwork (metal/wire
laths, etc.), conduits, or electrical cables buried in the wall.
1.
Place the AC adaptor wall mounting template (found later in this section) on the wall to mark the locations
where the 2 screws need to be placed.
KX-TVA50
2.
Install 2 anchor plugs (user-supplied) in the wall.
Hammer Anchor Plug
3.
Install the screws (included) in the wall.
Drive the screw
to this position.
80 Installation Manual
83 mm
(3-1/4 in.)
6.4 mm
(1/4 in.)
29 mm
(1-1/8 in.)
KX-TVA200
110 mm
(4-5/16 in.)
Document Version 3.0 2010/06