Programme Information - Zanussi ZWH 520 User Manual

Pause
To interrupt a programme which is running, depress
the START/PAUSE button: the corresponding pilot
light starts start to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
8 Programme progress dispaly
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme has
finished, the END light comes on.
The END pilot light flashes in the event of
operating problems. And the relative alarm code
appears on the display.
E10 = the machine does not fill
E20 = the machine does not empty
E40 = the door has not been closed
To eliminate the problem, see paragraph
"Something not working".

Programme information

Rinses
With this programme it is possible to rinse and spin
the garments which have been washed by hand. The
machine performs 3 rinses, followed by a final spin at
the maximum speed.
The spin speed can be reduced by depressing SPIN
button.
The final spin is foreseen only for cotton items as in
the spin programme.
For emptying out the water of the last rinse in
programmes with the NIGHT CYCLE option. Turn
first the programme selector dial to O, then select
programme and depress the START/PAUSE
button.
Separate spin at the max. for hand washed
garments. It has to be used for cotton items. You can
reduce the speed by means of SPIN button to adapt
it to the fabrics to be spun.
Delicate spin
Separate short spin at the maximum speed 700 rpm
for hand washed garments. It has to be used for
synthetic, delicate, wool/handwashed items. You can
reduce the speed by means of SPIN button to adapt
it to the fabrics to be spun.
Short cycle
This is a complete programme that can be combined
with the following options:
Spin speed reduction, NIGHT CYCLE and delayed
start.
To be used for laundry which is lightly soiled or
which needs freshening up.
Max. load 3 kg.
Washing temperature 30 C.
Programme duration 30 minutes.
Final spin speed 700 rpm.
Off/reset = O
To reset a programme turn the selector dial to O.
Now can a new programme be selected.
13
Drain
Spin