Water Softener; Setting The Water Softener - Electrolux ESF 6220 User Instructions

Hide thumbs Also See for ESF 6220:
Table of Contents

Advertisement

Water softener

To avoid scale deposits on the dishes and in the dish-
washer, the dishes must be washed with soft water,
i.e. water with a low lime content. The dishwasher
therefore has a built-in water softener, in which tap
water with a hardness of 4°d (German degree) and
harder is softened with the aid of special salt.
Water hardness
1
in °d
in mmol/l
51 - 70
9.0 - 12.5
43 - 50
7.6 - 8.9
37 - 42
6.5 - 7.5
29 - 36
5.1 - 6.4
23 - 28
4.0 - 5.0
19 - 22
3.3 - 3.9
15 - 18
2.6 - 3.2
11 - 14
1.9 - 2.5
4 - 10
0.7 - 1.8
under 4
under 0.7
1)(°d) German degree, measure of the hardness of water
2)[mmol/l] millimol per litre, international unit for the hardness of water
3)On this setting the length of the dishwashing cycle may be slightly longer.
*
factory setting

Setting the water softener

Adjusting the water softener to the setting given in the
table that corresponds to the hardness of the water in
your area:
The dishwasher must be switched off.
Setting manually:
1. Open the dishwasher door.
2. Remove the lower rack from the dishwasher.
3. Turn the hardness range switch to 0 or 1 (see table).
4. Replace the lower rack.
Setting electronically:
1. Press the ON/OFF button.
The LED in the ON/OFF button will become illumi-
nated.
If other indicators are also illuminated, this
3
means that a dishwashing cycle has been
activated. The dishwashing cycle must be
deselected (RESET):
Press function buttons 2 and 3 simultane-
ously for approx. 2 seconds.
All other indicators will go out.
2. Press the function buttons 2 and 3 simultaneously
and keep them pressed.
The LED indicators in function buttons 1 to 3 will
flash.
10
Adjusting the hardness setting Number of flashes of the
2
Manually
range
IV
III
II
I/II
I
Your water supplier will be able to inform you
3
about the hardness and hardness range of
the water in your area.
The water softener can be set manually using the
water hardness switch; it can also be set electroni-
cally using the buttons on the control panel..
Electronically
3
10
9
1
8
7
6
5
4 *
3
0 *
2
1
no salt necessary
LED indicator for the end
of the dishwashing cycle
10
9
8
7
6
5
4
3
2
1

Advertisement

Table of Contents
loading

Table of Contents