Table of Contents
Advertisement
Displaying the remaining cooking
time
If you select a cooking zone which is in timer mode,
the cooking time still remaining appears in the timer
display window.
Using the timer to measure short
periods of time ("Minute Minder").
1
Important! None of the cooking zones should
be set with the Timer!
1. Touch the "On/Off" sensor field for around two
seconds.
The digital display _ flashes.
2. Touch the TIMER W sensor field to activate the Ti-
mer function.
3. Using the + or - sensor fields, set the desired
length of time (for example, 20 minutes).
The Timer begins to run after a few seconds, and in-
dicates the time remaining.
When the set time has elapsed, an audible signal is
sounded.
4. Touch the TIMER W sensor field, to switch off the
signal.
Ending the timer function prema-
turely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer
simultaneously
1. Select the desired cooking zone using the cooking
zone buttons.
2. Touch the + and - buttons simultaneously: The
cooking zone and timer will switch off.
Switching off the timer - leaving the
cooking zone active
1. Select the desired cooking zone using the cooking
zone buttons.
2. Touch the "Timer" button again.
3. Touch the + and - buttons simultaneously:
– Only the timer will switch off.
– The cooking zone will stay on.
15
Advertisement
Table of Contents
