Door Reversal Directions; Electrical Connection; Technical Specification - AEG Electrolux EU 6321 T Instructions For The Installation And Use

Door reversal directions

Before carrying out the operations described
below, pull out the mains plug from the wall
socket.
Proceed as follows:
remove bottom hinge (5);
a)
remove door (4);
b)
unscrew pin (2) from the top hinge (1) and refit
c)
it on the opposite side;
unscrew part (6) and refit it on the opposite si-
d)
de;
refit the door and the bottom hinge on the op-
e)
posite side;
take off the handle cover, remove handle (3)
f)
and refit it on the opposite side.

Electrical connection

Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply.
Voltage can vary by 6% of the rated voltage.
For operation with different voltages, a suitably
sized auto-transformer must be used.
The technical data is indicated in the rating plate on the left side inside the appliance.
(Fig. 2)
TECHNICAL SPECIFICATION
6
D073
Fig. 2
1
2
3
4
5
GB
5