Functions - Electrolux EWW 1230 I Instruction Booklet

Start
After having selected the required programme,
press this button to start the machine; the
corresponding pilot light stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the
programme or the delay appears on the display.
Pause
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
Draining of water
By depressing the Start/Pause button
• The water of programme
• The water of the last rinse on programmes with
Rimse Hold option is emptied out and the
laundry is spun.
13 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme has
finished, the End pilot light comes on.
The DOOR light indicates if the door can be
opened:
• Light on: the machine is functioning, but the door
can be opened.
• Light off: the door can be opened (at the end of
the cycle) or cannot be opened because the
machine is functioning.
• Light blinking: the machine is in PAUSE and the
door cannot be opened.
(Soak) is emptied out
13
14 Programme selector dial
The selector is divided into 5 sections:
• Cotton, linen
• Synthetics
•Delicates
• Woollens (hand washing)
• Special programmes
• Reset programme X
X
The selector dial can be turned either clockwise or
anticlockwise.
Position E corresponds to the ENERGY SAVING
programme, position to "cold wash" and
position to "drying".
At the end of the programme the selector dial
must be turned to position X.

Functions

End of programme
When the door locked light has gone out, the door
can be opened. The light
programme progress display illuminates.
A flashing zero appears on the display.
Turn the programme selector dial to X.
Switch the machine off and remove the laundry.
Altering a programme
You can alter the programme before it starts.
When the programme has started, you can only
reset it by turning the programme selector dial to X
and then you can select the new programme.
Start it by depressing the START/PAUSE button
Interrupting a programme
Depress the START/PAUSE button
programme which is running, the corresponding
light starts to flash.
(END) on the
.
to interrupt a