Paring Mediabridge With Your Cell Phone; Answering / Making A Phone Call; Playing Music From A Cell Phone - Audiovox MEDIABRIDGE Installation Manual

Pairing MediaBridge with your cell phone via Bluetooth
1. Turn on the Bluetooth feature on your cell phone.
2. Select MediaBridge as your audio source from your radio, then select Bluetooth mode.
3. Search device from your cell phone.
4. Select MediaBridge from device list and enter password "0000" to connect.
Note: MediaBridge is only discoverable for Bluetooth pairing for the first 60 seconds after selecting Bluetooth mode within
the MediaBridge. This is indicated with a "DISCOVRABL" message on the radio display. Please perform pairing while the
vehicle is parked.

Answering / Making a phone call

• To answer an incoming call, press the next track button your radio or on
your remote.
• To reject an incoming call or terminate an active call, press the previous
track button on your radio or remote.
• To make an outgoing call, dial on the phone like you would normally.
Steering wheel button controls:
• The Phone button activates voice dial.
• The OK and track up/down buttons can be used to answer and hang up
a phone call.
Playing music from a cell phone through MediaBridge via Bluetooth
1. Enter Bluetooth mode on MediaBridge.
2. Make sure your cell phone is paired with MediaBridge.
3. Select and play a song from your cell phone's music player.
Note: Some cell phones require you to manually select the option to play music via (A2DP) Bluetooth Streaming. Song information is shown
on the radio display if your phone supports AVRCP1.3.
4. Use Track UP/DOWN to skip tracks / FF / RW songs on the AVRCP compatible phone.
Phone calls interrupt any music/audio
that is currently playing on the radio while
MediaBridge is the selected audio source.
The buttons on some radio systems will
not respond when the radio enters Phone
mode. To avoid this issue, disconnect
the MUTE wire from the MediaBridge to
the radio.
27