Technical Specifications; Special Accessories; Installation; Unpacking - Electrolux EFP 936 User Manual

Technical Specifications

Dimensions (in cm)
Lighting:
Grease filter
Maximum absorbed power
We reserve the right to generate constructive and chromatic modifications as required by technological growth.

Special accessories

Charcoal filter KLF 60/80

Installation

Unpacking

Check that the cooker hood has no damages.
Transportation damages should immediately be
reported to the one responsible for the transport
Damages, faults and eventually missing details
should immediately be reported to the seller.
Take care of the packing material so that small
children cannot play with it.

Placement

The hood is to be mounted on the wall.
When installed, the hood must be not less than
43cm. above electric burners or 75 cm. above gas
or mixed-fuel burners (fig. 6).

Electrical connection

Safety warnings for the electrician
Before connecting the appliance to the power
supply, check that the voltage indicated on the
rating plate corresponds to the mains power supply
available. Appliances fitted with a plug can be
connected to any standard power socket within
easy access.
Should it be necessary to provide a fixed
connection, the hood must only be installed by an
electrician authorised by the local electricity
board. When installing, an omnipolar disconnector
with a distance of at least 3 mm between contacts
must be provided.
The manufacture declines all responsibility for
malfunctions resulting from failure to comply with
the above instructions.
Height
Width
Depth
E-Nr. 610 899 421
39,5
89,8
27,5 (plus front panel)
1 x 11 W (PL lamp)
2
235 W
Fig. 6
Electrical connection
230 V – by means of fixed power cable with plug.
(Fixed connection of the appliance must only be
carried out by an authorised electrician.)
8
Min
Min
75 cm
43 cm