Fluke 1750 Technical Data Manual page 3

Comprehensive power system data
Every cycle on every channel is simultaneously
sampled providing complete analysis of power
quality, harmonics, power and energy. Cross-
channel current and voltage triggering captures
Events can be displayed against a variety of tolerance curves.
Display multiple parameters simultaneously on one graph.
Thresholds for the EN50160 report are easily customized.
Powerful data management
Data is automatically stored on the internal flash
memory that can store records for over a month
without compression or overwriting. Data is
retrieved via one of two quick and easy options:
download the data onto the included SD memory
3 Fluke Corporation Fluke 1750 Three-Phase Power Recorder
event data on all input channels simultaneously,
no matter which channel triggered the event. When
periodic analysis of the waveform may be needed,
the Snapshot mode captures waveforms at user-
defined intervals. Even dc signals can be recorded!
Full FFT on each channel to the 50th harmonic.
Full-featured power meter display for each channel and totals.
EN50160 report delivers an easy to read pass or fail chart
along with drill down data.
card without using your laptop, or transfer directly
to your computer via Ethernet, using TCP/IP protocol.
Voice, data, and picture annotations can be made
via the PDA to flag important points in the data
stream. Imagine being able to flag in your recorded
data when a transfer switch was operated, or load
changes were made.