Advertisement
Monogram.
™
ZISB420DM – GE Monogram 42" Built-In Refrigerator
with Dispenser and Water Filter
3/4" OVERLAY PANEL DIMENSIONS
For a more custom appearance, overlay panels may
be installed on trimmed models. The overlay panel
must be secured to a 1/4" thick backer panel which
slides into the trim. A spacer panel 0.10" thick must
be placed between the overlay and backer panel.
Assemble the panels with glue and screws.
• Center the spacer panel on the backer panel, left to
right and top to bottom. Secure the panels with glue.
• Center the spacer and backer panel on the overlay
panel and secure with glue and screws. Screws
must be countersunk into the backer panel.
IMPORTANT NOTE – Dispenser Models
The refrigerator is supplied with two dispenser trims, one
for framed panels and one for overlay panels. The overlay
dispenser trim is designed to fit a total panel thickness
of 1.100".
• If the panel is less than 1.100" a noticeable gap may be
created around the dispenser trim.
• If the panel is more than 1.100" the dispenser trim cannot
be secured to the door.
A
Grille Panel
F
Dispenser
Cutout
G
Freezer
Fresh Food
Panel
Panel
D
E
Specification Revised 8/03
110170
Dispenser Cutout
B
9-5/8"
C
1/4" Backer Panel
.10" Spacer Panel
3/4" Overlay Panel
Listed by
Underwriters
Laboratories
R
Door
1/4"
Backer
Panel
.250" + .10" + .750" = 1.100" Total Panel Thickness
• The overlay panel must be constructed according to the
specifications shown to achieve the correct total thickness.
• Alternative panel construction methods such as securing a
3/4" panel to a 1/4" backer panel cannot be used. Another
method, routing a 3/4" thick panel on all sides cannot be
used. These methods will not result in the required 1.100"
panel thickness.
*Cut the dispenser opening after the backer, spacer and
overlay panels have been assembled.
IMPORTANT NOTE: Maximum total weight for assembled fresh
15-3/8"
food panel is 50 pounds and 30 pounds for freezer panel.
A
B
C
39-7/8
9-1/2
68-3/8
39
8-5/8
67
40-1/8
9-3/4
68-5/8
For answers to your Monogram,
GE
GEAppliances.com or call
®
As an ENERGY STAR
Partner,
GE has determined that this product
meets the ENERGY STAR
®
GE Answer Center
guidelines for energy efficiency.
Overlay Panel
3/4"
Spacer Panel
Overlay
Panel
Backer Panel
NOTE: Left-to-right offset
is not always equal to
top-to-bottom offset.
.10"
Spacer
D
E
14-9/16
24-9/16
13-1/4
23-1/4
14-13/16
24-13/16 17-15/16 3-1/8
®
®
appliance questions, visit our website at
®
service, 800.626.2000.
*Dispenser
Cutout Position
F
G
GE Profile
™
or
Advertisement
