Care and Maintenance
After connecting the Flash Link, and before each dive, test fire
•
the flash on land in brightest possible light conditions to make
sure Flash Link is working.
Regularly check that the open end of the optical cable is
•
positioned directly in front of the camera's flash.
Regularly check that cable end has a clean cut with nothing
•
obstructing the optical core of the cable. If not clean, cut off end
with a sharp razor.
Clean cable assembly with fresh water and dry after each use,
•
and allow drying time before storage.
Prevent the cable from being crushed during storage and
•
transportation.
Don't bend or kink cable. Inspect and replace damaged cable.
•
18