Marantz M-CR510 Owner's Manual page 60

Contents Connections
n Network connection settings
Q0 Various items will be displayed if you selected "Wi-Fi" in
Example 1. Select or input items as necessary, and then click
"Test Connection" to apply the changes.
• Items displayed may vary depending on selected items and
connection status.
• After selecting each item, wait a moment for the display to be
updated.
Q1 Displayed if "DHCP" or "Proxy" is selected in Example 1. When
changing DHCP/proxy settings, input or select for each item.
%
• To apply network connection settings, click "Test Connection" after making
changes.
Front panel Rear panel
Playback Settings
2 Update on web screen
Firmware can be updated using the "Web control function"
(vpage 57).
"Web control function" (vpage 57) settings must be completed in
advance on a PC belonging to the same network.
For information on obtaining update files, please contact our customer
service center.
1
Click r from step 5 for the "Web control function"
(vpage 57).
The PC will display the following screen.
Wait for approximately 1 minute.
You can also gain access by entering the IP address shown by the
unit into a web browser.
60
Remote
Tips
GThe web displayH
FIRMWARE
Please wait...
Now,go to the new IP displayed in the body.
If do not move the page within 1 minute,please refer to IP.
GThe unit's displayH
Index
Appendix